SkyCapt

Selling an extra front wheel I won't be using. I'm moving somewhere flat so I won't be riding DH anytime soon. This wheel came on a bike I bought used and works great. The previous owner drilled the presta valve hole to fit a schraeder valve and run tubes... I have no idea why. He also put a tan wall tire on it and then blacked it out. Its a good wheel and could be put to good use.

Selling my downhill bike because I won't live where I can use it. It's really fun and set up as a 27.5 / 26 mullet. Extra 600lb spring included. The installed 500lb spring works for me, I weigh 190lb and it sags nicely at 30%. The gearbox is really fun to use. Easier than a cassette setup, you can shift while not pedaling at all. Link below to the listing I bought it from: https://www.pinkbike.com/buysell/2922401/ Specs: Frame Size: L Wheel Size: 26" Material: Chromoly (stronger and lighter than 4130 Chromoly) Front Travel: 203 mm Rear Travel: 200 mm * 450mm Reach Peregrine Frame Set * Pinion C-line 12 speed gearbox * DVO Onyx DC Fork * DVO Jade Rear Shock 450lb spring installed and can throw in a 400lb spring desired * Hope Tech 3 V4 Brakes * Hope 8" rotors F/R * Spank Director Stem * Spank Spike 800 Bars * Spank Spoon Pedals * Wheels: - Front: 27.5" Hope Fortus 30 rim / spank hex boost hub / new Maxxis DHF 27.5x2.6" tire - Rear: 26" Spank Spike 33 rim / spank spike hub / tan-walled Maxxis Minion DHF 26x2.5 with one side blacked out. * Maxxis Minion DHF Tires * Swappable front shock mount to run an 7.8 x 2.25 air shock. You can swap the forks to a single crown, drop some weight and have a capable climber and descender

Selling my wheelset to trim down on my bike parts. before an overseas move. These wheels are ready to ride providing you've got the right brake positioning/adapters. The magic with these wheels is the instant (infinite), silent engagement that happens in the rear hub. Both hubs use really nice bearings so the rolling resistance is the lowest in the industry. Video showing tech in the rear hub: https://www.youtube.com/watch?v=en1HhxKwdJo Specs: Hubs Front: Onyx Classic 15x100mm (non-boost), 6 bolt rotor mount, 32 spoke https://onyxrp.com/store/mtb-hubs/mtbfront-iso/mtb-iso-100-15mm-thru/ Rear: Onyx Classic 142x12mm, 6 bolt rotor mount, Shimano HG stainless freehub, 32 spoke https://onyxrp.com/store/mtb-hubs/mtb-iso-hg/mtb-iso-hg-142-12mm-thru/ Rims: (Front and Rear) WTB Frequency Team - 27.5" / 25mm Tires (set up tubeless): Front: WTB Bridger - 27.5" / 3.0 / TCS Tough/Fast - Knobs have been shaved on the side to narrow the tire. Rear: WTB Trailblazer - 27.5" / 2.8 / TCS Tough/Fast Cassette: SRAM 11-42T Rotors: Front: Shimano Ice Tech 180mm Rear: Shimano Ice Tech 160mm I'm willing to meet up half way depending on where you are coming from! (near Palm Springs CA) Thanks for looking!

Bought the wrong sized seatpost clamp like a doofus and am now selling. I struggled to get it onto the seatpost before realizing it was the wrong size (too small). 31.8 is the inner race diameter, so the seat tube (the frame, not the seatpost) needs to be a compatible/similar diameter. There is some light scratching on the underside of the clamp (it'll be invisible when mounted) so that's why this thing isn't listed and priced like it's mint. I've never actually used it. Buyer pays shipping.