teddygoround

Xt 2 pots of my meta tr, been used for about 20 rides. Upgraded to 4 pots hence sale. Can post once funds cleared or collection from Sheffield. Back brake will require bleeding obviously as it’s come out of internally routed frame. Front brake good to go! Cheers

Shock came off my trek slash as always run a coil on it. It’s been used 5 or 6 times when coil went for a service. So it’s pretty much brand new. Not sure on lengths etc but I assume they just fit trek frames only. My trek slash is the previous generation (not the new model). Have bought a new bike and sold the slash so have no need for it. Based in Sheffield but can post once funds are clear. PayPal or bank transfer. Cash if you pick up.

2015 (I think) Kona Explosif Frame, reynolds steel with adjustable drop outs. XTR rear 10 speed mech. KMC gold chain, XT cassette, XT cranks and bottom bracket, Hope norrow wide chainring, Shimano SLX brakes (one lever is a deore as original broke), 180mm rotor front, 160mm rear, Reverb 125mm dropper, Scott saddle, Renthal fat bars 10mm rise, Bontrager stem, Hope pro 4 rear hub on mavic 423 rim, front deore hub on WTB i23, Fox 32 Kashima 130mm with 3 stage adjuster (open, trail, locked), Schwalbe Rocket ron tyres (650b), Renthal bearclaw grips. I've had this bike since new and it's been upgraded heavily over the years. For a steel bike it's pretty light and it's kitted out with robust all mountain kit ideal for peak district riding, it rides lovely and will do everything from pump tracks to downhills to cross country races (not that I won any!). It's been well looked after and hasn't had much use in the last 3 years since getting my full sus. It does need new pads front and rear as they're squealing (probably due to lack of use!) plus has non matching levers if you're bothered by that sort of thing and the rear hub is getting ready for a new set of bearings. Also getting ready for a new set of jockey wheels, apart from that everything is spot on. It goes without saying that this is a second hand bike so doesn't come with any warranty etc. Located in Sheffield S10, sale is pick up only and cash/bank transfer on collection.

For Sale is my 2019 (bought 2018) Santa Cruz Nomad C, I bought the bike from new in August 2018 just as the 2019 models came out from 18 bikes. It has the odd mark here and there as you would expect from a bike that's not brand new but it’s in great condition. The main major mark is the dents on the rear rim, there are 3 or 4 detailed on the photos. It works fine and had no issues with sealing tyres etc. I changed the mech to a sram XO but apart from that it's pretty much standard, I also swapped the fork piston out to the 180mm shaft as it makes it feel much better on the front end. It wont come with pedals. Selling As bought a new bike. Collection only, no swaps. FORKS: ROCK SHOX YARI 180mm REAR SHOCK: ROCK SHOX SUPER DELUXE R REAR DERAILLEUR SRAM X0 Eagle, 12spd SHIFTERS SRAM NX Eagle, 12spd CASSETTE SRAM PG1230, 12spd, 11-50t CRANKSET SRAM NX Eagle 148 DUB, 32t - 170mm CHAIN SRAM NX Eagle, 12spd BRAKES SRAM Guide RE ROTORS Avid Centerline 200mm HANDLEBAR Race Face Aeffect R STEM Race Face Ride {stem} GRIPS Santa Cruz Palmdale Grips HEADSET Cane Creek 10 IS Integrated Headset SEATPOST Rock Shox Reverb 150mm SADDLE WTB Silverado Race Saddle FRONT TYRE Maxxis Minion DHF, 27.5"x2.5", 3C Silkshield REAR TYRE Maxxis Minion DHR II, 27.5"x2.4", 3C Silkshield WHEELS F: SRAM MTH 716, 15x110, Torque Cap, 32h R: SRAM MTH 746, 12x148, 32h Rim: WTB ST i29 TCS 2.0 27.5" Spokes: DT Swiss Competition