toferchris

34 tooth Race Face chainring that shows some use, but is in perfect working condition. It’s a Single ring and it is narrow-wide. Plus, it comes with a sticker!! Let me know if you have any questions. Buyer pays shipping

Hey all, I'm clearing out my parts box and I have no more use for my Shimano XT crankset. The arms are 175mm, and there is no BB included. I also have a 34t narrow-wide Race Face chain ring for sale (which I used with this crankset). Thanks for looking, PM with any questions. Buyer pays shipping

Hey everyone, Up for sale here is my gorgeous Yeti 575 with the carbon rear triangle. I am the second owner, and recently bought it from a 50+ year old man who had knee problems, so the bike has never been riden very hard. This is a fantastic do-it-all bike, ranging from XC to technical downhills. It's running 145mm of travel in the rear (with a fox rp23), and 150mm up front with an upgrade to the RockShox Revelation. The bike can pedal and climb better than any other bike with this much travel, and descends with what seems like bottomless suspension. Since buying the bike, all I have changed is the stem to a Race Face respond 45mm, combined with a Truativ Boobar 780mm handlebar. The frame is in EXCELLENT condition, with no scratches or dings. Components consist of: Sram X-9 drivetrain Truativ 3 ring crankset with hollowtech BB Avid Juicy 7 bakes, dual 160's or with the 180mm front rotor as pictured for an extra $5 S works The Captain tires front and rear DT swiss m1900 wheel set Standard seat post with WTB saddle Cane Creek headset Tubeless setup This is an amazing bike and completely ready to shred. I havn't owned it long, and it needs to go to someone who will use the bike to its full potential! Pedals are not included, and buyer covers shipping. Feel free to call, text or PM me with any questions! I can also send you the pics straight to your phone, I know they don't look the best on here. Thanks for looking! Chris

Hey guys, up for sale is a take-off from a bike I recently bought. It's a Crank Bros Joplin 3" dropper, but needs a rebuild. It is holding the same PSI fine, but the seals arn't doing their job anymore. The back piece to the remote clamp went missing when I took the post to a shop to get looked at. I'm sure that it is here, I'll keep an eye out for it. Price is so low considering the rebuild needed, but the kit is about $25 and it is definitely a DIY. Thanks for looking! Call, text, or PM me with any questions. Buyer pays shipping. Here's a PB review on the post: https://www.pinkbike.com/news/crank-brothers-joplin-review-2008.html

Hey guys, this stem came off of a bike I bought recently. It's a 31.8 clamp, for a 1 1/8 steerer, and 90mm long. I usually ride with short stems (using a 45mm) so I took this off right away. Cheap add-on for an XC bike! Call, text, or PM me with any questions or if interested. Thanks for looking! *buyer pays shipping*

Hey everyone, I'm cleaning out the bike parts box again and I have an extra Marzocchi 20mm thru axel. It came off of my old bomber. Works fine and just has a couple scratches on the ends. Buyer pays $3 for shipping. Thanks for looking! PM/text/call me with any questions or if interested.