tr1cky

Specialized Stumpjumper FSR Comp 29 Size XL, full spec and geometry can be seen in the link- www.specialized.com/gb/gb/115303 Purchased new in March this year as a return to mountain biking. Spec us as stock apart from the following upgrades- *set up tubeless *brake pads replaced with sintered compound- much better brake feel and pad life *dropper post lever upgraded to alloy lever- much more positive than the stock plastic one *Blackspire 32T cinch mount chainring- better ratio than the stock 28T, but I'll include the stock chainring too. *Rear tyre changed to Purgatory model to provide more grip for uk weather Many of the parts are new and not used as I ran other components- these include the bar/stem, saddle and cassette, other items like the wheels, grips have only been used for a couple of rides, again as I swapped to other items. Overall the bike is in excellent condition and has been extremely well maintained as I'm a qualified cytech mechanic and take pride in looking after my kit. Frame has no marks or scratches, I have fitted protective tape in all the usual areas (the tape on the toptube has a mark in it from mounting my garmin, but could easily be replaced). Only other marks are slightly wear/rub marks to the crank arm from use and the top of the dropper post has a couple of scratches from some poor transportation, but does not affect the use or performance. All very minor, but prefer to be completely honest. Bike also advertised elsewhere Please let me know if you need any more pics or have any questions Will listen to sensible cash offers:)

Roval Carbon control wheels 29 inch diameter These are currently set up as 15x100mm front and 12x142mm rear and include adaptors to make QR if required. Can also be adapted to boost spec with additional kit, not included, but could supply at additional cost. Wheels are in excellent condition, run straight and true. Bearings are smooth and run freely. No dents, dings or marks. Buyer has the choice of a Shimano or SRAM XD driver freehub body, both in excellent used condition. If not requested I will ship with the Shimano. The other can be available at extra cost if required.

Selling my Hightower as since building have barely ridden a mountain bike and would rather put the money into other hobbies. Bike was built in March this year with many new parts or near new parts from my previous set up, detailed below. It has covered just of 40 miles since build and I haven't ridden in the last 3 months. Frame- Santa Cruz Hightower CC frame,size XL, brand new in March and Invisiframe kit fitted straight away. Headset- Cane Creek 40 series brand new in march Forks- Rockshox Pike 150mm, some wear on crown from being on previous bike, shown in pics, this is the only mark on the bike! Brand new graphics to match bike and new seals and service also completed in March Stem- Hope 35mm new in March, also included K-Edge garmin mount. Bars- Enve new in March Grips- Vans ODI Brakes- Sram Guide RS with centre line rotors 200mm front/180mm rear, sintered pads near new Shifter- Shimano XTR 11 speed Rear mech- Shimano XTR clutch 11 speed Cassette and Chain- Shimano XTR 11 speed, all the XTR was new end of last year and hardly risen before being swapped onto the Hightower Cranks- RaceFace Carbon Next SL 175mm with 34T direct mount ring, Hope bottom bracket, Gamit upper chain guide Dropper- Rockshox reverb stealth 125mm drop Saddle- Specialized Phenom Wheels- Newly built in March, Hope Pro 4 hubs in orange, DT swiss comp spokes laced onto Light bicycle AM29 Carbon rims, set up tubeless with Specialized Butcher and Purgatory tyres Please no time wasters or offers of swaps. I have priced this to sell. Would consider splitting only if frames sells at £1850.

2013 Salsa horse thief frame Size large. I upgraded the shock to a rockshox monarch plus in October 2015 and have hardly used the bike since, so shock is as good as new. Frame has 120mm travel. Frame is in good condition and has been heli taped since new, so free from marks, any you can see are in the tape itself. Cane creek tapered headset fitted, lower bearing is worn, so am also including as brand new superstar components lower headset assembly. Also includes hope seat clamp and rear maxle(some marks to maxle lever as shown). I have also drilled a small hole in the rear of the seat tube low down so a stealth dropper can be run without issue. Does not effect strength of frame and is a neat solution to bring the frame up to date. Only selling as I couldn't resist trying a new Santa Cruz Hightower! But have really enjoyed how this bike rides and will kind of miss it!

Selling my Santa Cruz Tallboy CC frame Frame has only seen 150 miles of use and is for sale due to lack of use! I have too many bikes meaning this has to go. Was purchased in May this year, can provide receipt for warranty etc. The frame is in fantastic condition, and could quiet easily pass for new. It does has one very small lacquer chip on the drive side of the down tube, but is barely noticeable and I have pictured. Please note that the Chrisking headset is not included and has now been removed. Included in the sale is the santacruz bag, grease gun with grease, protective patches, shock pump (all unused) and manuals Size XL - Santa Cruz's sizing tend to come up short, as I'm 5'11" and this is a great fit Geo and info can be found here- http://www.santacruzbicycles.com/en/uk/tallboy Features Full carbon frame and swingarm 100mm (4") VPP™ suspension 29" wheels Forged upper and lower links Double sealed pivots for long bearing life Dual grease ports on lower link for easy maintenance Full carbon dropouts and disk mounts Angular contact bearings maximize stiffness Collet axle pivots lock in place without pinch bolts Bottle cage mount within front triangle fits piggyback shocks Molded rubber swingarm and downtube protection Stealth and external seatpost cable routing 142mm rear axle spacing Threaded Bottom Bracket Collect much preferred due to the value, but can arrange courier at buyers expense, please contact for details Any questions, please ask.