ttran037
- Member since Jun 29, 2014
- Male / 36
- Fontana , California
- 5 Followers
- 24 Trailforks Points
Recent
Selling
Apr 18, 2021 at 17:12
Apr 18, 2021Santa Cruz Nomad V3
$4000 USDFrame: 2015 Santa Cruz Nomad V3 Carbon C chassis, Size Medium
Rear Shock: Push Eleven Six, tuned for rider at 170 lbs for trail riding. Recently rebuilt for annual service on 9/15/20
Fork: 2020 Fox Factory 36 160 mm of travel, Kashima coated. Grip 2 Damper
Headset: Cane Creek forty
Wheels: Stans Flow ZTR laced to DT 350 hubs. Recently purchased on 1/29/21. Only rode the wheels twice
Front Tire: Maxxis Assegai 27.5x2.50 WT 3C Maxterra EXO+
Rear Tire: Maxxis Agressor 27.5x2.30 Exo
Cassette: SRAM Eagle, 10-50t, 12-speed
Chain: SRAM XX1 Eagle, 12-speed
Rear Derailleur: SRAM XX1 Eagle, 12-speed
Crankset: SRAM XX1 Eagle Carbon, 32T
Shifter: SRAM XX1 Eagle, 12-speed
Brakes: Shimano XT M8120 4 piston brakes with Shimano XT M8100 brake levers
Rotor: Shimano Ice Tech 200 mm front and 180 mm rear
Handlebars: Race Face Next
Stem: Race Face
Saddle: WTB Volt
Seatpost: Rock Shox Reverb Stealth Dropper, 150 mm. 1st generation A1
Grips: ODI Elite Pro
Chain guide: MRP SXG
Bike is ready to ride! The dropper works but is slightly slow to return. It does not sag however. It may need to rebuild. The bike is upgraded with a 2020 fox factory fork and push eleven six shock. Wheels are brand new and recently purchased on 1/2021. It does have some cosmetic scratches that are not noticeable.
Also, when I was installing the brake set, I forgot to put on the rubber cover on the left brake lever I do have the brake cover but haven't had the time to put it on as it does need another bleed if it were to be installed. It obviously does not affect performance more of a cover
I also have an extra lower link with new bearings already pressed. I will also give you with the purchased along with the derailleur hanger. If you wish, I can install for you.
Selling
Apr 11, 2021 at 17:59
Apr 11, 2021Santa Cruz Hightower LT CC XX1
$4200 USDI am selling my 2018 Santa Cruz Hightower LT CC XX1. I truly enjoy riding this bike. I recently bought another new bike and had to make some room in the garage. I hoping that its new owner will truly enjoy this bike as I did. I am the first and only owner and have a copy of my receipt if needed. Specs are as below
Frame: Carbon CC chassis, tapered head tube, forged upper link. Medium size
Rear Shock: Fox Float Factory DPX Kashima, 150mm
Fork: Fox 36 Float Factory, 160mm with SKF fork seals
Headset: Cane Creek 110 IS
Wheels: SC Reserve Carbon rims laced to Industry Nine Torch 110x15mm front hub and Industry Nine Torch 148x12mm rear hub with DT 14/15 gauge spokes, alloy nipples
Front Tire: Maxxis Assegai 29x2.50 WT 3C Maxterra EXO+
Rear Tire: Maxxis Agressor 29x2.30 Exo, brand new, my last tire recently developed a puncture
Cassette: SRAM XG1295 Eagle, 10-50t, 12-speed
Chain: SRAM XX1 Eagle, 12-speed
Rear Derailleur: SRAM XX1 Eagle, 12-speed
Crankset: SRAM XX1 Eagle Carbon, 30T
Shifter: SRAM XX1 Eagle, 12-speed
Brakes: SRAM Guide Ultimate with Avid Centerline 180mm Rotors
Handlebars: Santa Cruz Carbon 780mm, 35mm clamp
Stem: Race Face Turbine R
Saddle: WTB Silverado SLT
Seatpost: Rock Shox Reverb Stealth Dropper, 150 mm
Grips: ODI Elite Pro
Other: Gold titanium bolts on the pivot link (see photo)
I will also include the pedals: Crankbrother mallet E
There are a few scratches on the bike but no cracks (see photos). The fork does have a creak due to a creak in the crown steerer unit (CSU) however it does not affect performance. Creak developed after fox warranty ran out. It only can be heard when going down gnarly rock garden or drops. The rear triangle has a scratch because rocks would get in between the rear triangle and tire. I put in a new lower link because I thought it made more economic sense in buying an entire new link than buying tools to change the bearings.
I have performed lower leg service and air can service every 3 months. I had wheels true once a year. I also had the rear shock rebuilt in 9/2020 by the path bike shop in orange county just to meet the recommended hour service. I also rebuilt the Rockshox reverb dropper post once a year.
I recently performed a lower and air can service along with regreasing headset and bb in preparation for this bike to be sold. It i ready to ride!
Hoping to send this bike off to a new awesome owner!
ttran037 pinkbikeaudience's article
Aug 7, 2015 at 8:22
Aug 7, 2015
GT Bicycles - UCI World Cup DH - Windham Fantasy Contest
Men:
1. Gwin
2. Atherton
3. Minaar
Women:
1. Atherton
2. Carpenter
3. Hannah
ttran037 pinkbikeaudience's article
Jul 3, 2015 at 22:03
Jul 3, 2015
Lenzerheide DH WC Fantasy Contest - Win a Scott Voltage FR Frame
Men:
1. Gwin
2. Atherton
3. Bryceland
Women
1. Ragot
2. Atherton
3. Carpenter