waterski4life1
- Member since Feb 14, 2015
- Male / 29
-
Melbourne , Florida - 3 Followers
- 10 Trailforks Points
Recent
waterski4life1 SramMedia's article
Aug 25, 2015 at 18:06
Aug 25, 2015
Steel X-Sync Rings from SRAM for Under $20
Where's the 104BCD? Isn't that the more common standard anyway?
Selling
Aug 24, 2015 at 15:53
Aug 24, 2015
Fox 32 Performance 140mm
$275 USDI'm selling a Fox 32 performance fork with 140mm of travel. It was an OEM fork on the bike I bought a year ago brand new.
The fork only has 1 year of semi regular use and is still working great. I am selling because I bought a Fox 36 as an upgrade.
The fork has spent it's whole life wrapped in racers tape to protect it but from the use of a North Shore-esque rack there are some rub marks on the crown. The stanchions and lowers are perfect.
Steerer cut to 8 1/4"
waterski4life1 RichardCunningham's article
Aug 24, 2015 at 9:17
Aug 24, 2015
Introducing the 2016 Pivot Mach 6 - Aluminum
I can't put my finger on it either, but something about the bike's look and angles, visually at least, isn't right. Maybe it is a photo editing error but the bikes look squished shorter than they should be and it just looks wrong to me.
waterski4life1 pinkbikeaudience's article
Aug 22, 2015 at 8:32
Aug 22, 2015
Results and Overall Standings: World Cup DH Val di Sole - Finals
There's quite a few armchair engineers from when the bike was first shown on pinkbike - http://www.pinkbike.com/news/aaron-gwins-troy-brosnan-specialized-demo-prototype.html
waterski4life1 davetrumpore's article
Aug 19, 2015 at 18:19
Aug 19, 2015
Photo Epic: The Final Chapter - World Cup DH Val di Sole, Track Walk
For the picture with the caption 'There is talk of a few top guys that this could be one massive step down. The takeoff being the log drop and the landing at the stump just below the riders pictured here.'
There better be a camera placed here, that drop is going to be amazing!
waterski4life1 BicycleHub's article
Mar 31, 2015 at 15:26
Mar 31, 2015
Getting The Bike Ready For Summer
The best way is to remove every single piece from the bike and put it in one bucket, then take each peace out one at a time from the bucket and inspect/clean and reinstall in its intended place. Almost impossible to mess anything up then :p
waterski4life1 pinkbikeaudience's article
Mar 26, 2015 at 19:06
Mar 26, 2015
Replay: Crankworx Rotorua - DH
go to the crankworx.com site
waterski4life1 pinkbikeaudience's article
Mar 26, 2015 at 19:03
Mar 26, 2015
Replay: Crankworx Rotorua - DH
Is anyone else just getting the pump track video from before and not the DH?
waterski4life1 pinkbikeaudience's article
Mar 26, 2015 at 18:50
Mar 26, 2015
Replay: Crankworx Rotorua - DH
With a broken rear shock, this is the closest thing to biking I have for at least another week! Good job on Crankworx for the live streaming! (Or attempt at it anyway)
