younghoffy
- Member since May 1, 2011
- Male / 28
- Santa Rosa , California
- 15 Followers
- 18 Trailforks Points
I like to ride bikes.
Recent
Selling
Feb 26, 2023 at 15:50
Feb 26, 2023Marin Alpine Trail 2 Carbon LRG
$2500 USDI bought the bike new almost 2 years ago. I have taken very good care of it. The only reason I am selling it is because I do not need a bike with this much travel, I ride my hardtail and cross bike more often. There are scuffs and scratches on the bike from normal wear and tear ( I tried to picture most of them). The rear rim does have a slight dent but it does not effect the tire holding (is set up tubeless). The bike is mostly stock except I changed the grips, dropper post, and tires.
Specs:
Suspension: Fox 38 performance fork, and fox DPX2 shock
Wheels: 32h marin rims on shimano hubs
drivetrain: Shimano SLX 12spd
brakes: Shimano SLX 4 pistons
tires: Shimano butcher 2.6 front and eliminator 2.3 rear ( both tires only have a handful of rides on them)
seatpost: Ethirteen 175mm dropper
I am not including pedals.
Looking to sell locally but will ship within country at buyers expense.
Let me know if you want any more pics or have any questions.
Selling
Jun 15, 2021 at 13:09
Jun 15, 2021Xfusion Manic 150mm 30.9mm
$150 USDEnded up getting a longer drop post. Only rode this one a handful of times. Works great and no complaints with it. Comes with lever too.
Selling
Oct 8, 2020 at 17:13
Oct 8, 2020Shimano XT 12spd crankset with SLX chainring
$160 USDBrand new still in box. Bought them and ended up using different parts. Only issue is slight tear on crank box. No bottom bracket.
Selling
Jun 9, 2020 at 23:28
Jun 9, 2020Yeti Sb5.5 large XT build
$3800 USDOriginal owner of the bike for about the past two years. Have a decent amount of miles on it but have taken very good care of it. The suspension seals as well as the pivots and infinity link have been replace and have about 10 rides on them. The brake pads are in good shape, the chain only has a few rides on it. The bike does have some scratches and small dents on the wheels.( I tried to get pictures of everything). Nothing bad or damaging the integrity of the frame or parts. Overall the bike is ready to go, would only need new tires to really make it perfect.
Parts list:
bars: stock yeti carbon bars, been cut to 780mm w/ odi grips
stem: stock raceface turbine stem
Brakes: xt brakes, brand new front lever
drivetrain: Xt 11 speed
Wheels: dtswiss 350 hubs with xm481 rims
tires: front: maxxis dhf , rear: maxxis highroller (both are pretty worn, only things on the bike that need to be replaced.)
cranks: raceface turbines
fork: fox factory float with fit4 damper
shock: fox factory dpx2
seatpost: 150mm fox transfer
pedals not included.
Let me know if you're interested or would want some better pics or have any questions.
Thanks, Ryan
Selling
Jun 15, 2019 at 0:30
Jun 15, 2019Kona Jake the Snake
$1200 USDBought this bike brand new about a year ago. The bike is in great shape. I have replaced the tires with Maxxis ravager 40c, put on a thompson seat post, and just installed a new bottom bracket. I have also put on a larger shimano cassette with a 42t granny, along with a new chain. Let me know if you have any questions. Cheers.
Selling
Feb 28, 2018 at 18:56
Feb 28, 2018Kona process 153
$2000 USDHi I have a 2016 kona process for sale. It's in pretty good shape, there are some scratches/scuffs from normal wear and tear, also one small dent on seat stay. I just went through and did a deep clean, serviced the fork and shock and put on a new chain. The bike is ready to rock. There are no issues whatsoever, might need some new tires in the future but besides that the bike is solid.
Specs:
REAR SHOCK - RockShox Monarch RT
FORK - RockShox Pike RC Solo Air 160mm QR15 Tapered
CRANKARMS - SRAM GX 1000
CHAINRINGS - 32t, X-Sync w/Guard
B/B - SRAM Press Fit GXP 92
CHAIN - SRAM PC1130
CASSETTE - SRAM XG1150 10-42t 11spd
R/D - SRAM GX
SHIFTERS - SRAM GX
BRAKES - Shimano Deore w/ metallic pads
FRONT BRAKE ROTOR - Shimano Deore 203mm icetech 6 bolt
REAR BRAKE ROTOR Shimano Deore 180mm icetech 6 bolt
HEADSET - FSA Orbit 1.5 ZS No.57B
HANDLEBAR - RaceFace sixc 35mm clamp 800mm wide
STEM - Raceface atlas 35mm
SEATPOST - KS Lev Integra
GRIPS - ODI Ruffian MX
SADDLE - WTB Volt Sport SE / Volt Sport SE 250
WHEELS - Specialized Roval carbon
TIRES - Ethirteen trs 2.35
Let me know if you have any questions or want some better pics.
Buyer pays shipping.
Thanks
Selling
Dec 22, 2017 at 10:47
Dec 22, 2017WTB stp i29 wheelset
$220 USDWheels are true and in good shape, no dents just some minor scuffs. They came off a 2016 kona process 153, so the front is 15x100 and rear is 12x142. They are tubeless ready and are taped and come with valves. Comes with front rotor too.
Selling
Jul 26, 2017 at 14:24
Jul 26, 2017
Selling
Feb 4, 2017 at 17:17
Feb 4, 2017Kona process 153 large
$2800 USDThe bike is in really good shape I have not ridden it in the last 4 months due to injury. It is super fun and capable with awesome long, low, and slack geometry. The bike has about only 350 miles on it. There are scuffs and scratches around the bike from normal wear and tear. No dents or cracks.
specs:
REAR SHOCK - RockShox Monarch RT
FORK - RockShox Pike RC Solo Air 160mm QR15 Tapered
CRANKARMS - SRAM GX 1000
CHAINRINGS - 32t, X-Sync w/Guard
B/B - SRAM Press Fit GXP 92
CHAIN - SRAM PC1130
FREEWHEEL - SRAM XG1150 10-42t 11spd
R/D - SRAM GX
SHIFTERS - SRAM GX
BRAKES - Shimano Deore (pads still have good amount of life left.)
FRONT ROTOR - Shimano Deore 203mm (centerlock)
REAR ROTOR - Shimano Deore 180mm (centerlock)
HEADSET - FSA Orbit 1.5 ZS No.57B
HANDLEBAR - Kona XC/BC 35 Riser
STEM - Kona XC/BC 35
SEATPOST - KS Lev Integra 150mm drop
GRIPS - Specailized lock-ons
SADDLE - WTB Volt Sport SE / Volt Sport SE 250
FRONT HUB - Novatech QR15
REAR HUB - Novatech 142x12mm
SPOKES - Sandvik Stainless 14g Black
RIMS - WTB STp i29 TCS
FRONT TIRE - Maxxis Minion DHF EXO 27.5x2.3" (both tires are setup tubeless.)
REAR TIRE - Maxxis Minion DHF EXO 27.5x2.3"
Pedals not included
Looking to sell locally but will ship within the US at buyers expense.
Let me know if you have any questions or want some better pics. Thanks.
Selling
May 12, 2016 at 18:02
May 12, 2016Kona process 111 dl
$2200 USDI built this bike up last spring with a brandnew frame and put almost 1000 miles on it. Its in good shape no dents or cracks just some scratches here and there. I do have some paint i got from the local hobby shop that is almost identical to the red that i will throw in with it. Just recently cleaned and re-greased all pivots. Overall super fun and capable bike, just want to try a 650b now.
specs:
fork: rockshox revelation rl 120mm
shock: rockshox monarch rt3
brakes: shimano deore (changed the pads not to long ago, 180mm rotor front, and 160mm rear)
shifter: shimano saint 10spd
Bar: Kore ocd 750mm wide
grips: odi ruffian mx ( okay shape)
stem: ritchey trail stem ( i think 45mm length)
rear der: shimano slx 10sd (only a few rides on it + new housing and cable.)
cranks: sram x1 cranks with 32t n/w chainring
cassette: shimano xt 11-36 w/ wolftooth 40t extended cog
chain: shimano xt (just installed with rear derailleur)
wheels: stans ztr flows (pretty true, just slight wobbles on both)
seatpost: specialized command post 125mm drop (good condition except the lever is missing a pin so it moves around a bit but works fine)
seat: sdg belair
tires: maxxis minion dhr2 2.3 front and rear. (rear is pretty worn but front is good, currently set up tubeless)
Pedals not includes as well as spare tube and pump. Ill throw in the bottle cage though :)
Looking to sell locally but will ship at buyers expense.
Favorite news
Video: Cross-Training With Yoann Barelli
24 Apr 2015
Video: Skills to Pay the Bills
25 Nov 2014
Video: Just Another 'Trail Ride' in Squamish
9 Oct 2014