2019 Bushing Tool, RWC NB Tool & Eyelet Bushings

Bushing Tool, RWC Needle Bearing Tool & Eyelet Bushings (DU or DP4)


BUSHING TOOL
.
This tool is designed to remove and replace shock eyelet bushings. The bushings are a press fit into the shock eyelets so this tool can be used in a vise, arbor press or with a soft headed hammer.
*****
*****
The 1/2 inch Bushing Tool is machined 300 Series Stainless Steel to exacting tolerances to reduce tool wear - $25.00 (US) (Includes a pair of DU Bushings) - In Stock
*****
The 1/2 inch Bushing Tool and RWC Needle Bearing Tool is machined 300 Series Stainless Steel to exacting tolerances to reduce tool wear - $30.00 (US) (Includes a pair of DU Bushings) - In Stock
*****
If you currently own one of my 1/2 inch Bushing Tools and are migrating to the RWC Needle Bearing reducers then this Tool will work for you - $10.00 - In Stock
*****
The 12mm Bushing Tool is machined from 300 Series Stainless Steel to exacting tolerances then black anodized to reduce tool wear - $25.00 (US) (Includes a pair of DU Bushings) - In Stock
*****
*****
Flipnidaho has put together the perfect illustration on the intended use of this tool.
.
http://forums.mtbr.com/showthread.php?t=396483
.
NOTE: THE 1/2 BUSHING TOOL NOW WORKS WITH THE CANE CREEK 14.7 BUSHING
.
.
Shipping charges are as follows:

$3.50 - USA
$10.00 - Canada
$12.00 - World wide

*****
*****
DU BUSHINGS - In Stock
.
DU Bushing Type - Carbon Steel Backing with a PTFE (Teflon) and Lead/Bronze Wear Surface.
.
These dry bearings can meet the demanding criteria for long life and trouble-free performance with or without lubrication.
.
The DU Bushing cost is $3.00/pair (US)
.
--12mm DU Bushing which Fit – Answer Manitou (2007-2011), Rock Shox models (2007-2011 Bar, Ario, MC3, MC3R, and Pearl), and X-Fusion (2007-2010 Vector, O2, & Glyde) Shocks.
.
--1/2 inch DU Bushing which Fit – Fox, Cane Creek, Romic, Marzocchi Roco, Progressive 5th Element Coil, Rock Shox (2007-2011 Monarch and Vivid), 2007-2010 X-Fusion H3 Shocks, 2011 X-Fusion (Glyder, Vector and O2) Shocks, and 2012 X-Fusion O2 (RCX, RLX, & RL).
.
.
The DP4 Bushing cost is $5.00/pair (US)

DP4 Bushing Type - Carbon Steel Backing bonded to Sintered Bronze interlayer then overlaid with a PTFE (Teflon) Wear Surface.

--1/2 inch DP4 Bushing which Fit – Fox (All Models), Cane Creek (All Models), Romic, Marzocchi Roco, Progressive 5th Element Coil, Rock Shox (2007-2012 Monarch and Vivid), X-Fusion (2007-2010 H3), (2011 Glyder, Vector and O2), & (2012 O2 RCX, RLX, & RL) Shocks.
.
.
INSTALLATION NOTES:
.
Care must be taken to insert the bearing squarely into the housing to avoid damage to the lining material. A smear of oil may be applied to the housing bore to assist the fitting operation.
.
Even though the outer wear surface of bushing material is extremely durable when rubbing against a suitable shaft or thrust face, but care must be taken to ensure that the bearing material is not scratched or otherwise damaged by sharp projections before or during installation.

http://huckingkitty.com/forums/viewtopic.php?t=475&p=7982
.
.
.
Shipping charges are as follows:

$3.50 - USA
$10.00 - Canada
$12.00 - World wide

.
I am a well-regarded seller on Ebay. Check out my reviews: http://myworld.ebay.com/mtnbiker4life/

.
Please specify what size Bushing Tool and DU Bushings you need upon contact.


.