2021 Truing Stand Adapters for Thru-Axle Hubs

Truing Stand Adapters for Thru-Axle Hubs, 12mm, 15mm, or 20 mm

These are Truing Stand Adapters for Thru-Axle Hubs. The sizes available are 12 mm, 15 mm and 20 mm. These adapters are designed around the Shimano / Fox standard and Rock Shock's Maxle standard.

These adapters are machined from 6061-T651 Aluminum billet to exacting tolerances then anodized to decrease tool wear. The o-rings will prevent the adapters from falling out when the wheel is removed from the truing stand. For best results, apply a light coating of grease or oil on the o-rings before installing them in the Hub. This helps in the removal of the adapters. The o-ring color may vary between black, green or red depending on my suppliers stock at the time of purchase.

Sizes available are 12mm, 15mm and 20mm.

$15.00/each size or $35.00 If you want to purchase all three sizes.


Note: These adapters are used during the wheel building and Truing process. They are not the missing pieces to your latest MacGyver project.
.
Shipping charges are as follows:

$4.00 - USA
$10.00 - Canada
$13.00 - World wide
.

I am a well-regarded seller on Ebay. Check out my reviews: http://myworld.ebay.com/mtnbiker4life/

.