2012 Waltworks steel frame w/ sliders

2012 custom built Waltworks hardtail frame.

Geometry is 18.5" center of BB to top of seat tube, 24.6" horizontal top tube, 71/73 head/seat tube angles with an 80mm fork (I ran it with a 100mm fork and it still rode well), and 425mm chainstays. Frame also has Paragon Machine Works post mount sliders so you can adjust that CS length or run it singlespeed (it has braze-ons for gear cables).

Frame has a 44mm head tube to fit both straight and tapered steerers (I'm including a tapered Cane Creek 40 headset), a threaded 73mm bottom bracket, a 27.2mm seat tube (clamp included) and 135x10mm rear spacing.

I'd keep the frame but I haven't ridden XC forks in the 100mm travel range for a few years, and I don't think I'm going back, so off this goes to someone who will actually use it.

Not racy enough for you? Check my ad for a 2012 Rocky Mountain Vertex 970 RSL carbon frame!