2013 Fox 34 Talas 150mm 26 FIT CTD Fork
Category: Single Crown Forks
Wheel Size: 26"
Front Travel: 150 mm
Front Axle: 15 x 100 TA
Wheel Size: 26"
Front Travel: 150 mm
Front Axle: 15 x 100 TA
Original Post Date: Jul-05-2015 2:46:55
Last Repost Date: Jul-05-2015 2:46:55
Still For Sale: Sold
View Count: 418
Watch Count: 0
Last Repost Date: Jul-05-2015 2:46:55
Still For Sale: Sold
View Count: 418
Watch Count: 0
2013 Fox 34 Talas 26 FIT CTD Fork
26" wheel, 150 mm travel, 20 mm axle, tapered steerer tube cut at ~193mm, star nut fitted.
Overall the fork is in great condition having been regularly serviced by myself. New seals and foam rings were fitted only 3 months ago and it has just had a strip down, clean and service of the lowers and talas system ready for sale.
Internally the fork is perfect. As you can see in the photos there is no stanchion wear at all (indicative of running with dirty oil due to poor maintenance). Talas travel adjust, CTD and rebound adjusters work as expected and there is no bushing play. The FIT damper has no air ingress and is working great.
Externally the fork has the usual few stone chips mainly around the axle area, however generally the paintwork is very good and the decals fully intact. No cable rub on the crown, just a slight rub on the blue talas adjuster (shown in photo).
The only flaw is a bit of abrasion on the upper talas side stanchion. There are very minor surface scratches in the anodising (5 mm long) which are perfectly smooth to the touch and have never effected the forks performance - no sharp edges, no oil loss, no seal damage. Detailed photos are included. I can honestly say in use you would never know the marks were there and they haven't had any detrimental effect on performance or reliability.
£150 to Newcastle/Sunderland area. £160 for UK delivery - Paypal or bank transfer.
26" wheel, 150 mm travel, 20 mm axle, tapered steerer tube cut at ~193mm, star nut fitted.
Overall the fork is in great condition having been regularly serviced by myself. New seals and foam rings were fitted only 3 months ago and it has just had a strip down, clean and service of the lowers and talas system ready for sale.
Internally the fork is perfect. As you can see in the photos there is no stanchion wear at all (indicative of running with dirty oil due to poor maintenance). Talas travel adjust, CTD and rebound adjusters work as expected and there is no bushing play. The FIT damper has no air ingress and is working great.
Externally the fork has the usual few stone chips mainly around the axle area, however generally the paintwork is very good and the decals fully intact. No cable rub on the crown, just a slight rub on the blue talas adjuster (shown in photo).
The only flaw is a bit of abrasion on the upper talas side stanchion. There are very minor surface scratches in the anodising (5 mm long) which are perfectly smooth to the touch and have never effected the forks performance - no sharp edges, no oil loss, no seal damage. Detailed photos are included. I can honestly say in use you would never know the marks were there and they haven't had any detrimental effect on performance or reliability.
£150 to Newcastle/Sunderland area. £160 for UK delivery - Paypal or bank transfer.
Warning: This listing is out of date. You must Edit this item before you can repost!"
£150 GBP
Restrictions: Reasonable offers only, Will consider any Trade, Will ship within country only
Newcastle, United Kingdom Related Listings
|
|
Mill Valley, California
|
|
|
|
|
|