2010 Santa Cruz Bullit-Gen 2.0-Chris King Everywhere

Not exactly sure on the year. Bought this as a frame and built it with a mix of new and used parts for the wifes dh bike. It has only been ridden a handful of times over the past 4-5 years and as the dust gets thicker on it, its time to move on. Super light rider, so my emphasis was on saving weight. If you have a young ripper you want to build dh confidence with, this could be your ticket. Thing is in mint condition.

Small Santa Cruz Bullit, Gen 2.0, Midnight blue front triange, Polished rear triange.Purchased used, but barely
Pivot bearings were replaced when I bought the used frame and have only a handful of rides. Also have a brand new never mounted replacement set
Currently set up as 135mm rear end spacing, but i do have the drop outs to switch to 150mm, just no rear wheel.
Marzocchi 66 180 mm fork 1.5 headtube. Bought used, sent to Zocchi for a service. They hooked me up with an air damper as at 100 lbs, they didnt have a light enough spring. Did all the internals, and it is like butter. So smooth. Have all the old internals to swap it back if you want, but it feels smoother then coil.
Red Chris King 1.5 external headset. Dont remember the model, but straight 1.5.Bought brand new
Red Chris King threaded bb. Bought brand new.
Avid Juicy 7 stoppers, bought used, upgraded black dangerboy levers. 203 mm rotors
Manitou swinger 6 way 8.5x2.5 have a ti spring upgrade, but cant remember the weight. think i have a 225# and a 325# for it
Shimano xt 2x9 shifter set up
Silver race face deus cranks 22/32 with an anodized red straight line bash guard
Xt 9 speed short cage reverse/rapid rise/low normal rear d
Xt 9 speed clamp on front d
Red chris king hubs 20 mm front 135x9 rear, upgraded to fun bolts. Bought used, but i have lots of kings and the tools, so they were fully serviced and i will redo them with fresh ring lube before they roll. minimal pitting in the freehub, standard with king alu. I do have a stainless freehub, but that will be extra $$$ it has never been used
Mavic 717 xc disc rims silver
Kenda Nevegal 26x2.5 rubber
Pedals not included.

Not sure what else you want to know. This thing was built piece by piece by me with an eye on weight. I havent weighed it, but can stick it on a scale. Its still a dh bike and no carbon on it so...Mavic 717's are no dh rim, but for a feather weight they were perfect. I built them with red ano nipples and two ano blue nipples for key spokes. If you are a bigger rider, I am happy to build them into something burlier if you want. Your parts, my labor. I know 26 wheel size is dying in north america, but this thing is a confidence booster going down. Willing to part out, but not sure i am willing to sell parts before the frame, but let me know.
Willing to trade for carbon bronson/ intense tracer 275c/ibis hd 3 Not sure what else, happy to obviously stack cash on top for full ride or can talk about frame/part options.