2015 Apace Pingar, 29", XL, modern geo titanium HT

Hardtail titanium 29er frame from German Vpace Bikes. Prototype for their current T1LT model.

I bought it directly from one the guys from Vpace whose description I have listed below in German.

Frame has now ridden a short season since I bought last Autumn.
It has been setup as singlespeed (34-19) and geared.
I can sell a fitting KS dropperpost as well for only €70 more.

Otherwise the frame comes with Hope headset and seatpost collar and pretty much nothing else.
It rides fantastic, but I just only use my full suspension bikes, so now this must go to be used by someone else.
I rode it with a 130 mm fork - spot on for tight singletrack, suberb handling downhill and no wandering front on uphills even if they were super steep.

Shipping EU wide is approx €80

More photos on my instagram profile
dothecrux

Geodaten:

Lenkwinkel bei Gabel Einbaulänge 520mm ist 69* Headangle
Sitzwinkel 73* (unten 77.6, oben flache) wegen gebogenen Sitzrohr. Seatangle
Sitzrohr ist 520mm Mitte bis Oberkante, ST length mid to top
Sattelstützmaß ist 31.6, seatpost diameter
Oberrohr horizontal 640mm (lang wegen kurzem Vorbau und flachem Lenkwinkel) 34.9mm dick, horizontal top tube length
Unterrohr ist 44.5mm dick
Steuerrohr ist 130mm, Innenmaß ist 44mm, Steuersatz ist von Hope Tapered, head tube length
BBdrop ist 55mm bei den oben angegebenen Maßen
Kettenstreben entlang der Strebe 430mm, chainstay length
Tretlager ist 73mm, BB is threaded
IS Bremsaufnahme,

I have fitted a 2.4" Maxxis Ardent, but only to try. It would rub the chainstays. 2.35" Butcher from Specialized fits with rubbing and ok clearance.