2017 Press Tool & Press Fit Bottom Bracket Adapters

The Bearing Press Handles and Adapters are machined from 6061-T651 Aluminum billet to exacting tolerances then anodized to decrease wear. Ergonomic handles to ensure consistent bearing pressure while reducing hand fatigue. The 3/8" ACME rod is 12 inches in length. I can cut custom lengths upon request but it will affect shipping charges.

NOTE: Lubricate Threads before use.


The BB30 Bottom Bracket Installation Adapter Tool - These press adapters are for the Cannondale’s BB30 Bearing System that presses directly in the frames BB Shell. Red Anodize

The PF30 Press Fit Bottom Bracket Installation Adapters for 46mm x 73mm or 68mm Bottom Bracket Shells. These press adapters are for the Press Fit 30 Bottom Bracket Assemblies that houses the 6806 Bearing in a composite or aluminum shell. This Installs the following Press Fit Systems: Chris King PF30, SRAM: PF30, Race Face: X-Type Press Fit 30, and other PF30 Bottom Bracket Systems. Green Anodize

The 41mm ID Press Fit Bottom Bracket Press Adapters - Set includes two Press Adapters which Installs Shimano BB86 & BB92 Press Fit Systems, SRAM Press Fit GXP, Race Face X-Type Press Fit, Chris King PF24 and other press fit BB systems. Black Anodize

SRAM DUB Bottom Bracket Installation Press Adapters for PF30, BB30, & PF89.5/92 Bottom Bracket Standards. Gold Anodized

The BB90/95 – 37mm ID Press Fit Bottom Bracket Installation Adapters for 24mm Crank Spindles. These adapters install the 2437 (37x24x7) bearing directly into the Trek frames which allows Shimano 24mm Cranks and SRAM: GXP Cranks into Trek frames. Purple Anodize


Shipping charges are as follows:

$8.50 - USA
$25.00 - Canada
$30.00 - World Wide
.
.
I am a well-regarded seller on Ebay. Check out my reviews:
http://myworld.ebay.com/mtnbiker4life/

.