2016 Rocky Mountain Altitude - Upgrades, Carbon Wheels

Looking to part ways with my 2016 Rocky Mountain Altitude 750. The bike is obviously fairly new and has only seen 1 and a half seasons of use. While it is the 750 model, it's seen a lot of upgrades during the short time that I've had it since purchasing it, including wide, hand-built carbon wheels. It has been very well cared for by an experienced mechanic, (myself) since I purchased it brand new. The suspension was serviced this spring, meaning that the front and rear shock each received new seal kits, and had their fluid changed. Brakes were also bled, and pads replaced during this time. Pedals are not included. Not looking to trade, let me know via Pinkbike message if you are interested.

Specs:
Drivetrain: Raceface 32t Narrow-wide chainring with Funn Zippa Lite Chainguide and Bash, with full SRAM GX 11 speed, including shifter, chain, cassette, and rear derailleur (All installed at the beginning of the 2017 season.)
Seatpost: Raceface turbine dropper, 150mm. (Installed new at beginning of 2017 season.)
Wheels:
Maxxis Minion DHF 2.3" tires, rear replaced prior to current season. (Both front and rear have 80% of tread life remaining.)
Funn Fantom Hubs, hand laced with double butted spokes to K-Craft (Taiwan) gloss black finish carbon rims. (30mm internal width, tubeless set-up. Wheels tuned prior to current season, and spoke tension re-balanced, brought to spec.)
Shimano RT86 (XT) 180mm rotors.

Other than these upgrades, plus new Funn Hilt grips, and a recently replaced lower headset cup and bearing, the parts spec is stock. See http://www.bikes.com/en/bikes/altitude/2016 for details.