2015 Remedy 9.8 29 18.5 frame bearings perfect extras!

2015 Trek Remedy 9.8 29er 18.5 inch frame. Carbon main frame and seat stays with magnesium rocker and aluminum chain stay. This is a 140mm travel 29er with a 68 head angle, 437mm chain stay and 432mm reach in the low position. The high position raises and lengthens these numbers. this bike would fit someone great between height 5'8" to 6'. Im 6 foot and ran it in the high position with a 150mm pike fork and a 70mm stem. This worked great for the more xc style trails in my area but was a little short feeling in the reach. This is first boost rear axle spaced frame! 12x148 rear spacing. This is the also the best bike for someone looking to make a 650+ bike (27.5x2.8) This bike has a higher bb than most bikes in its class thus preventing the horrible pedal strike problems current 27+ bikes have. Ok, lets try to make it quick. All of the bigger scratches are pictured. the frames paint has a nice deep gloss to it, but has numerous scuffs and swirls in the paint. this frame is mechanic maintained so all the frame bearings are perfect. yes this frame has absolute butter movement to it. no play, no noise, all smooth. the frame bearings have been replaced twice across all of its pivots. yes even those pesky little 8000 series bearings are smoother than on a new bike. It comes with two shocks. the original shock is the fox drcv re-active. It has has had one basic service and was used for the first year of ownership. the other shock is a RockShox Monarch Debonair rt3. it has had two basic services, one quite recently and it is also stacked with 4 tokens. this is the perfect shock for this bike. Check the pic of the chips of the frame bottom bracket area. these are the worst of the whole bike. These have been there for a year. Since there isnt any structural damage they have not spread/spider webbed. There arnt any soft spots or areas of structural damage on this bike anywhere. it is 100 percent structurally and mechanically sound. The add is for the frame and shocks, but i have also included some extras to help the buyer get this awesome rig up and going. pictured you will see the extra seat stay and shocks along with a Bontrager Pro stem and 780mm handle bar. also included is some frame parts for additional cable routing and bottom bracket parts (SRAM GXP). the frame already has a very good condition bottom bracket installed and a cane creek 40 headset. The bike has routing for internal dropping seat post and can be set up for internal routing on shift and rear brake. The bike also has brackets for external cable routing. I found the bike could be made to look very clean and current if you removed all this hardware and ran the cables/hoses internally and covered the holes with black electrical tape. If you have any compatibility questions for shifting and braking please let me know before committing to payment. i will not return the bike due to buyer error will ship to US/Canada only Thanks!