2017 Pivot SwitchBlade LAST chance then parting out

Up for sale is my Medium Pivot Switchblade. 29r $4500.00 now with stock barely used DT swiss wheels Last chance and im going to part out ((this weekend)) you pay shipping

Willing to sell frame, Headset, Fox x2 shock, Fox fork with New CSU and stock Air spring, BB and spindle and wheels for $3000.00

Bike as it sits with Stock DT swiss in my other add $4500.00 https://www.pinkbike.com/buysell/2275512/


Bike is a XT XTR build KIT with FOX X2 stock with but I upgraded to the following items...

Magura Danny Macaskill brakes with 180mm rotors ($700.00 USD) ($880 CAN)

Race Face Next SL Carbon cranks

Works Components 1 degree offset headset. Puts the bike at 65.5 HTA

Push ACS3 160 mm coil Conversion ($389.00 USD) ($485 Can) was installed in September with Blue spring 170 to 185 pound and FOX FIT 4 damper was serviced in July with a PUSH tune and Motul oil. and SKF green Dust seals

Mrp Carbon Chain guide.

Ergon Grips.

Giant 160mm Dropper post.

Fabric Scoop Seat ( Saddle)

I took very very good care of this bike, FOX X2 rear shock was completely serviced in july by Suspension werks in Vancouver, as well I did 5 lower bath services on the fork. It has a few knicks and scratches from normal wear and tear. I protected most of the areas with 3m tape. Has used Ethirteen TRS 2.35 sticky triple front tire and Michelin 2.35 wild AM Rear Tire

Just recently installed a new RF Bottom Bracket.


NOT INCLUDED and forgot to remove is the XT pedals and ONE up EDC TOOL.

Will also included some spare brake pads, Stock headset 55mm stem and 15mm cup for 27.5 PLUS wheels, TWO spare derailleur hangers.

If you are interested in certain parts removed I have no problem with that I am willing to work with the buyer if something doesn't interest them. With the exception of the PUSH ACS3 coil conversion in the fork.

Please message me for more info I'm located in Kamloops BC. Willing to ship into USA.