2016 DEVINCI TROY, Large, New Parts!, Custom Build

2016 DEVINCI TROY Custom Build

This is a well maintained, Devinci Troy, that’s had a fresh tune-up throughout, including front/rear brake bleed. Several parts on this bike are brand new, and I’ve called those out below. Purchase also includes spare parts that are listed at the bottom of ad. I’m the original owner, and the bike has spent its life in a dry climate, where trails close when they’re wet.

Originally built in Aug. 2016. Selling because I bought a newer model. Located in Santa Cruz, CA.

FRAME:
• Size: LARGE
• Material: CARBON DMC-G
• Rear Travel: 140mm
• Front Travel: 150mm
• 27.5” wheels
• Boost Spacing: 15x110mm front / 12x148mm rear

NEW / NEVER RIDDEN PARTS:
• Wheels: Stan’s Flow MK3 Wheelset, 29mm inner width, Boost spacing front/rear
• Chain: SRAM PC-1170
• Headset: FSA Orbit Cartridge w/ carbon top cap
• Tires:
- Front: WTB Convict 2.5” TCS Tough Casing (2-ply)
- Rear: WTB Breakout 2.3” TCS Tough Casing (2-ply)
• SRAM Guide Front brake pads
• Grips: Chromag Palmskin, black

BIKE SPEC:
Suspension:
• FOX FACTORY SERIES 36 Float fork, Kashima Coating, Boost spacing
• FOX FACTORY SERIES Float X rear damper w/ piggy back, Kashima Coating
Drivetrain:
• SRAM XX1 11spd RD
• SRAM XX1 11spd shifter
• SRAM XX1 Crankset/BB, 175mm length
• SRAM XX1 XSync 34t chain ring
• e*thirteen TRS 9-44t cassette
- largest 3 cogs replaced Fall 2017
Brakes:
• SRAM Guide Ultimate w/ carbon lever blades
• Front Rotor: SRAM Centerline 2-piece, 6-bolt, Ti hardware, 170mm
• Rear Rotor: SRAM Centerline 2-piece, 6-bolt, Ti hardware, 160mm
Seat Post:
• Fox Transfer 150mm dropper w/ Fox remote lever
Cockpit:
• Easton Havoc carbon handlebar, 780mm wide, 35mm clamp diameter, Black w/ white decals
• Race Face Turbine CNC alloy stem, 32mm long, 35mm clamp diameter, Black
Saddle:
• WTB Rocket Team, Ti rails, 130mm width

SPARE PARTS:
• Spare Derailleur hanger
• Lightweight, carry w/ you tool, for replacing Der. Hanger
• 1 set extra SRAM Guide brake pads (new in packaging)

FRAME GEOMETRY:
Two geometry configurations compliments of a flip chip in the seat stay / rocker pivot. L0 Setting = slacker HT angle, and lower BB height.

LO SETTING LARGE
ST (mm): 470
SA (deg): 74.5
HA (deg): 67
TT (mm): 626
REACH (mm): 460
CS (mm): 426
WB (mm): 1186
BBH (mm): 338
SOH (mm): 733
STACK (mm): 618
HT (mm): 125

HI SETTING LARGE
ST (mm): 470
SA (deg): 74.9
HA (deg): 67.4
TT (mm): 624
REACH (mm): 464
CS (mm): 424
WB (mm): 1184
BBH (mm): 343
SOH (mm): 738
STACK (mm): 615
HT (mm): 125

Buyer pays shipping.

Thanks for looking!