2016 Santa Cruz Bronson C S -- UPGRADES

Size Large Santa Cruz Bronson V2, Carbon C frame:
I am the original owner of this bike, and have had it for the past two years. I work as a bike mechanic at my college campus bike shop, so I have been able to keep the bike running very well since i bought it. Pivots have been fully rebuilt/regreased/torqued to spec whenever any play has developed, Both the fork and shock have been serviced every six months, last serviced around the new year. Both brakes were bled last week and are running well (despite cosmetic scratches). 4 months ago, I replaced the chain, chainring, and cassette. The chain is well below 70% wear. The ARC27 rear rim didn't do well with the sharp rocks in Colorado, so I upgraded to a DT EX471, which is running true and dent-free. Fresh bearings were installed in the rear hub 2 months ago. Both tires (Specialized Butcher Grid 2.6 Front, Maxxis Minion DHR2 EXO Rear) are nearly new. The reverb was warrantied about 6 months ago, and has been running flawlessly.

Issues: Cosmetic scratches (pictured). Everything else runs well!

FULL SPECS:
Fork - Rockshox Pike RC
Shock - Fox Float X Factory
Derailleur - SRAM GX
Shifter - SRAM GX
Cranks - Raceface Turbine
Chainring - Absolute Black Oval 32t
Cassette - SRAM GX 10-42
Chain - KMC 11spd
Bottom Bracket - SRAM GXP threaded
Brakes - Shimano SLX
Headset - Cane Creek
Bars - Raceface Aeffect 780mm
Stem - Raceface Ride 50mm
Grips - Sensus Disisdaboss
Hubs - Sram MTH 746/716
Front Rim - Easton ARC 27
Rear Rim - DT Swiss ex471
Front Tire - Specialized Butcher Grid 27.5x2.6
Rear Tire - Maxxis Minion 27.5x2.35
Seatpost - Rockshox Reverb Stealth 150mm
Saddle - WTB Volt