2015 Norco Range with Monarch Plus and 160 Pike

Just purchased a new bike, so selling my old one. I swapped a bunch of parts over, so just selling frame w/shock, fork, and dropper post. I purchased the bike new in 2016 from Fanatik bike shop in Bellingham, WA, and rode it for two years. Most of it was covered with clear helicopter tape, which I pulled off. It does show signs of use, with scratches and scuffing in usual/expected spots (see photos for notable examples). I just had the fork fully serviced in November, 2018 (lower, damper, air cartridge), so it's in great shape (I have the paperwork). Otherwise, bike was working great when I stopped riding it. Here is a link to the frame specs from the Norco site: https://www.norco.com/bike-archives/2015/range-c-71/

Here are some details of what's included:

Frame: Carbon with alloy chainstay (160 travel)
Shock: Rockshox Monarch Plus RC3
Fork: Rockshox Pike RCT3 160 solo air, standard (non-boost) spacing (steerer tube cut to 16.5 cm; room for a couple spacers under stem)
Seatpost: Rockshox Reverb 150, with a couple scratches near seat clamp (zero impact on performance). Works great; but you'll need a new hose and remote button.
Bottom bracket: Pressfit 92 (it's got a Race Face BB installed, but it needs to be replaced).
Headset: Cane Creek 40

I left the rear brake and shifter housing in the frame, to help with internal cable routing.

If you have any questions or would like to see more pictures, just let me know!

Tom