2012 Transition BLINDSIDE large clear * Price Drop *

picked up the frame & fork used 2016 and had a few good times with it, but it's too big for me so decided to sell. frame is in good condition with a few surface scratches here and there. chain slap on the chainstay, bearings are smooth and solid but some will need changed in near future I'm sure. axle & drop outs are also in good condition.

Transition BLINDSIDE, large clear 2012, good condition

FSA ZS top / CC 40 EC bottom (smooth & firm)
RF Chester crank 170 & BB (solid)
RF Chester seatpost
RF Chester stem 50 x 31.8
Chromag OSX Fubar blue
Odessy saddle
AVID Elixir 7 trail brakes OR Shimano XT (buyer's choice)
SRAM 200 & 180 HS1 rotors
SRAM GX 10spd RD (med cage) & shifter
SRAM 11-32 cassette
RF NW 30t chainring
2014 RockShox DOMAIN 180 RC (smooth & solid)
--- Med, Firm and X-Firm springs included (new seal kit 2017, new oil 2018)
2012 FOX DHX 5.0 (smooth & solid)
--- polymer DU bushings, al spacers and 400, 450 & 500 lb spring included
Azonic Outlaw wheelset (ano gray or white/blk)
--- trued about a year ago at the LBS (barely ridden since)
Kenda Nevegal DH stick-e 2.35 front 75% rear 50%

also can throw in an abandoned 2013 FOX DHX RC2

NOTES:
1) one shock bolt needs replaced, but I might as well replace both (TBC has in stock). It is properly torqued into place but the socket head stripped out, easy fix for me. (..I am my own mechanic..)
2) I would prefer to replace the 40 mm stack stem with a 35 mm stack + one 5 mm spacer. the fork steer-tube was trimmed a tad too short and it fits but not preferred. if you understand steer-tube / stem setup then you will know what I mean.

no grips or pedals, let me know if you have any questions
thanks for looking