2018 Nicolai Geometron G15 29" Longer (Medium)

G15 Ad
For sale is my 2018 Nicolai Geometron G15 in size Longer (medium), anodised matt black.
It is a very high end build and has been well looked after.

Has been well looked after, with regular fork and shock services.
Frame protection on areas where cables may rub so there are only a few cable rub/marks.
Cables heat shrunk to tidy them up
The frame bearings are fine and run smoothly
It is in very good condition and only a handful of marks which is to be expected – mostly on the downtube by the BB, drive side seat stay and non-drive chain stay (see photos).

The bike will also come with the One Up EDC tool installed in the fork steerer –a tool which is worth around £80 for the full kit.

Will ship within the UK, it is down to the buyer to sort out insurance and any other fees associated with the shipping – I will just package it up. Local collection is preferable.



Build details:
Frame : Nicolai Geometron G15 Longer
Shock : Fox Float Air X2 Factory 216 - installed with 3 volume spacers
Fork : Fox Float 36 Factory RC2 2018 160mm – brand new CSU fitted in early September this year, installed with 2 Volume spacers. Lower leg service done every 1 ½ months
Headset : Hope
Wheels : Stans Flow MK3 29 on Hope Pro 4 hubs Boost front and rear - this wheelset was built up earlier this year, there are a few small dings/scratches but nothing serious, they run pretty true.
Tyres: Specialized Butcher Grid rear and Hillbilly front - the butcher is only a couple of rides old
Bars : Nukeproof Horizon 770mm 25mm rise 31.8mm diameter
Stem : Hope Tech 35mm length
Grips : DMR Deathgrips – right side is a little battered
Brakes : Hope Tech 3 E4 180mm floating rotors front + rear - pads still got some decent life left on them and they have been recently bled.
Dropper post : Fox Transfer Factory 150mm drop with lever - the post likely needs a service fairly soon but still works fine.
Shifter : Shimano XTR 11 Speed M9000 I spec II - mounted to Hope brakes
Rear Mech : Shimano XT 11 Speed M8000 Shadow +
Cassette : Shimano XT 11 Speed M8000 - replaced in April, probably needs replacing sometime over next couple of months
Chain : Shimano XT 11 Speed M8000 - it is still in good condition.
Chainring : Hope 34T direct mount Boost - will need replacing relatively soon
Crankset : Hope Spiderless 170mm
Bottom bracket : Threaded Hope 30mm 68/73mm width - bearings are still in good condition
Chain Guide : Hope Tech Slick Guide


If there's any questions, don't be afraid to ask

Cheers,
Henrik