2016 Specialized Enduro Elite

Nearly New Specialized enduro elite, was insurance replacement but due to work commitments has remained unridden for the past 18 months living in my best mates bedroom. open to sensible offers, a grate bike for the money ideal upgrade or first full suspension bike with plenty of potential.

RRP of £3000

If you're looking for a bike that's agile on big, nasty descents and holds its own on long, arduous climbs, look no further than the Enduro FSR Elite 650b. Its frame features a M5 Aluminium construction that's built off our 650b Geometry. Along these lines, the frame gets a roomy top tube, the shortest possible chainstays, a low bottom bracket, and a slacker head tube than what's found on the 29 all to perfectly blend climbing and descending characteristics together. The Enduro also includes plenty of travel, 160mm at the front and 165mm at the rear, in order to increase control over small bumps and big hits alike. At the build kit, we spec'd for reliable performance, including a RockShox Pike RC 27.5 fork and a custom Monarch Plus for a supremely plush suspension setup, a one-by SRAM X1 drivetrain with a wide range of gears, and a Command Post IRcc dropper with up to 10 middle positions. Altogether, this Enduro is agile, eager, and ready to dominate the entire mountain.

The Specialized Enduro Elite 650b 2016 Features are:

Frame: M5 alloy, 650b geometry, tapered head tube, PF30 BB, ISCG |05 mount, internal Command Post IR routing, 142mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 165mm travel

Rear Shock: Custom RockShox Monarch Plus, AUTOSAG, 3-position compression adjust, rebound adjust, 215.9x57.2mm

Fork: RockShox Pike RC 650b, Solo Air spring, 160mm travel, compression adjust, rebound adjust, tapered steerer, 42mm offset, 15mm Maxle Ultimate thru-axle

Headset: 1-1/8" upper, 1-1/2" lower, threadless, Campy style, cartridge bearings

Stem: Specialized XC, 3D forged alloy, 4-bolt, 6-degree rise

Speed: 11

Rear Mech: SRAM X1, 11-speed, alloy cage

Chainset: SRAM GX-1000, 11-speed, PF30, 30T X-Sync ring, 94mm BCD spider

Bottom Bracket: SRAM, PF30, OS press-in bearings, sealed cartridge

Cassette: SRAM XG-1175, 11-speed, 10-42t

Chain: KMC X11L, 11-speed, w/ reusable MissingLink

Front Brake: SRAM Guide R, metallic pads, 200m Centreline rotor

Rear Brake: SRAM Guide R, metallic pads, 180mm Centreline rotor

Rims: Roval 650b, alloy, 29mm inner width, 24/28h

Front Hub: Specialized, Hi Lo disc, sealed cartridge bearings, 15mm thru-axle, 32h

Rear Hub: Specialized, Hi Lo disc, 4x sealed cartridge bearings, 12mm thru-axle, 28h

Tyres: Specialized Butcher Control, 60TPI, 2Bliss Ready, folding bead, 650bx2.3" Front Specialized Slaughter Control, 60TPI, 2Bliss Ready, folding bead, 650bx2.3" Rear

Seatpost: Command Post IRcc, cruiser control technology, micro-adjust height adjustable, alien head design, bottom mount cable routing, remote adjust SRL lever, 30.9mm, S: 100mm travel, M/L/XL: 125mm


There are no pedals included.

Contact for any more information