|Seller:||rideitall-bmx-dh-road-unicycle | Login to contact seller | seller History | Add to My Watch List|
|Location:||Denver , Colorado , United States|
|Date:||Jun-16-2019 7:53:21 Views: 3055 Watch Lists: 12|
|Category:||All Mountain/Enduro Bikes|
|Wheel Size:||27.5" / 650B|
|Restrictions:||Any offer, No Trades, Local pickup only|
located in Denver, CO - pickup & cash only please.
ALMOST BRAND NEW 2018 Diamondback Sync'r hardtail w/ KS LEV dropper post & other add-ons listed below. The bike has about 200miles on it with only 5 miles on the cassette (warranty replacement). It was bought new in October, assembled & dropper installed @Mojo Wheels, & then Mojo went through the bike 100 miles ago during cassette warranty replacement. Water bottle holder & WTB saddle not included. This bike is very fresh & a very capable trail bike for beginner - advanced riders. It's a ton of fun on every trail I've ridden. This bikes built ready to go w/ every basic add on you could want to make it trail ready. This bike super fun, I'm going to basically get the 27+ equivalent again from Diamondback when I sell this. Great customer service from them I had a cassette warranty type issue and they sent one within 2 days of me reaching out.
Build breakdown below:
DROPPER: $400 + labor
AMS GUARDS: $117
RACE FACE CRANK BOOTS: $10
TOTAL BUILD: $1,727
I'm listing the bike OBO. I love riding this bike, but I've decided I want to do a 27+ build for the winter months. The bike is perfect if you want something to do XC laps on but can also handle descents & other dual suspension style stuff. It has 5 small scratches (pictured) that resulted from it tipping over into another one of my bikes in the shop. Bike has not been crashed in its 100 miles. All parts 100% working at this time. Bike will be clean upon purchase apologize for the slightly dirty pic - a bit cold for washing at the moment.
HERE"S THE FACTORY SPEC **ORIGINAL SEATPOST CAN BE INCLUDED IF YOU WANT?
"FRAME: 6061-T6 Butted Alloy for 27.5", Tapered Head Tube, Formed Top and Down Tube, w/ Integrated Disc Brake Tabs, Progressive Geometry, 148x12MM Thru-Axle for Maxxel
FORK TYPE: Rockshox Recon RL, Solo Air, 130mm Travel, 32mm Stanchions, 15mm thru axle, Tapered Steerer Tube, w/ Turn Key Lock out
HEADSET: FSA NO.57, Sealed Cartridge for Tapered Headtube
CRANKS: Raceface Effect Cinch w/ Steel 30T "Narrow Wide"
BOTTOM BRACKET: Raceface Outboard Bearing
REAR DERAILLEUR: SRAM NX X-Horizon, 11 Speed
SHIFTER: SRAM NX 11 Speed X-Actuation Trigger
COG SET: SRAM PG1130, 11 Speed, 11-42T
CHAIN: KMC X11EL, 11 Speed
FRONT HUB: 32h Alloy, 100x15mm Thru-axle, Sealed Cartridge Bearings, w/ CNC Disc Mount
REAR HUB: 32h Alloy, Boost 148x12mm Thru-axle, 2 Sealed Cartridge Bearing, for SRAM XD w/ CNC Disc Mount
SPOKES: 14g Stainless Steel
RIMS: Diamondback Blanchard 28R, Tubeless Compatible, 32h
TIRES: WTB Vigilante, 27.5x2.3"
BRAKES: Shimano MT500 Hydraulic Disc, w/ 180mm Front and 160mm Rear Rotors
BRAKE LEVERS: Shimano MT500 Hydraulic
PEDALS: DB4L Alloy Platform w/ Replaceable Pins
HANDLEBAR: Raceface Chester, 780mm Wide, 35 Bar Bore
GRIPS: New DB "Flanged" Lock-on, 135mm Silcone
STEM: Race Face Chester, 40mm Reach, 35 Bar Bore
SEAT: DB Sync'r Saddle
EXTRAS: Owner's Manual"
Cool FeaturesSubmit a Story to Pinkbike
RSSPinkbike RSS Feed