2018 Evil Insurgent Custom Build

The bike was bought and built in February of 2018, and due to a neck injury I couldn't ride much. The bike is is amazing shape and the pictures show that, just put brand new brakes on it because I swapped the one that were originally on it to my new build. Fork had a lower service recently and the shock had an air can service at the same time (approx. 3 rides) so the suspension is on point. The driveline has tons of life left in it (see pictures) and just had a new chain put on recently (I went 12spd so I didn't need the spare chain so I put it on for the next owner)

The bike is a speed demon, it absolutely hauls!

Some reviews:
https://freehubmag.com/articles/evil-insurgent-review
https://www.pinkbike.com/news/evil-insurgent-review-2015.html

Parts:
DVO Diamond set to 160mm at the moment
DVO Topaz has needle bearings for the upper link (makes it super sensitive)
Crank Bros. Highline Dropper 160mm
Raceface Turbine cranks 170mm with 30t chainring
Shimano XT shifter and derailed
11-46t cassette
hand built Flow MRKIII Flow rims laced to Hope Pro 2 Evo hubs
Shimano 4 pot brakes with 180mm rotors front and rear
Chromag Contact pedals
Continental Projekt Der Baron tires setup tubeless
Lynx DT seat

$3200 USD= $4200 CND

Second cheapest insurgent in canada, and easily one of the cheapest custom builds on PB.

Any further questions feel free to ask, Low ballers will be dealt with appropriately.

Matt