Misfit Dissent 29" frame, Kona P2 fork w/ extras

This is an XL Misfit Dissent 29er frameset with sliding dropouts and a bunch of extras. It has both the geared dropout with derailleur hanger and the single speed dropout. They don't make the hanger any more, and it's very rare. There are no dents or dings on the frame, and it's in great shape. I touched up a few rub spots too. It comes with a Kona Project 2 steel fork with updated geometry that has a 470mm A2C and width to support up to a 2.8" tire (3" if it's on the narrower side). Frame uses a 1-1/8" steerer tube, a threaded 24mm bottom bracket, and rear spacing is 135mm quick release. It has a headset, stem, seatpost, and seatpost collar all included. This is my third Misfit Dissent and I've loved all of them. Every time I go to a geared bike (I prefer running these SS) or a boost frame, I keep missing the simplicity and lightness of these and return to them. I've had these built up as low as 22lbs in the past. While it's aluminum, it is very compliant and rides like a steel frame. They almost have a cult following, me included.

Full build specs-

-Misfit Dissent 29" frame with sliding dropouts and both single speed and geared derailleur hanger dropout, XL (21.5")
-Steel Kona P2 new geo disc fork with 470mm A2C, matching matte black
-Salsa flip-lock seatpost clamp
-Generic seatpost, 27.2mm, 350mm
-Brand new sealed bearing headset- just pressed with completely sealed bearings, it's basically a Chris King knockoff; I run these on a few of my bikes and they've been maintenance free and buttery smooth
-Ritchey Comp 4-axis stem, 120mm
-Extras: brass headtube badge, rear aluminum badge, both dropouts