Magura TS8 R140 29” fork (140mm)

Purchased new in March 2018, used for a little over a year. This is a great fork – stiff, light, and highly predictable. It’s not the most compliant on small bumps, but it rides high in its travel, and supports through hits and turns. I liked the fork so much I bought two for both of my bikes. I’ve since moved to longer travel choices. The steerer has been threaded to support a OneUp EDC tool, but you can install a standard star-nut if preferred.

I recently serviced the fork, replaced the seals with Enduro Fork Seals, and swapped the factory grease for an oil bath – which makes the fork a bit more supple. Includes the t25 tool that inserts into the axle. I can include a crown race if you need it


Details:
• Wheel size: 29”
• Brake mount: PM180 (can go up to 203 with adapter, but 180 is smallest rotor supported)
• External settings: rebound, air spring pressure, DLO3 (soft, firm, dynamic lockout)
• Axle: T25, includes axle mounted wrench tool
• Steerer: 6 7/8” / 175mm

Reviews:
https://bikemagic.com/bike-components/magura-ts8-r-29er-suspension-fork-review.html
https://singletrackworld.com/2014/09/magura-ts8-r-dlo3-120mm-29er-fork/