2019 Norco Sight C1 29 - Large w/ Upgrades, Pending Sale

2019 Norco Sight C1 29 in size Large. I'm 5'10" with a 31" inseam and it fits me really nicely, but do know that if you have a shorter inseam you may need a shorter dropper. This was customized via Norco's bike builder so it's got a really nice build kit on the carbon frame. Price reflects light use and excellent kit. This setup and geometry makes it a perfect all around bike that's happy to do anything I've asked of it. It's a lot of fun at the local bike park and has also taken me down the gnarliest tech trails in the area. Selling to pick up a new Norco because they build rad bikes!

Purchased late last summer and ridden on dry weekends. Frame and components in really good, used condition. The frame was wrapped when it was brand new. Have added some close up pictures of any scratching, luckily the frame wrap has done it's job well. There is a small tear in the saddle, some marking on the bars from repositioning controls, minor scratches on fork lowers from bumping into things, and about a 2 inch scuff on the inside of the seat stay (pictured). I live in a condo so I have to clean it after every single ride, and I do a full drivetrain clean and lube at least every 3 rides (usually more often since trails often hold some water in the PNW). Torque wrench used on every single bolt. Fork, shock and dropper get wiped down before and after rides to keep them running really smooth. Fork was serviced about 5 hours ago by The Shock Howse, shock is about halfway between services.

Price includes a new set of front and rear sintered brake pads. If you'd like it without handlebars, stem, and/or pedals let me know.

New photos 4/19/20 to reflect sale spec. See full spec list below for details.

Buyer pays for packing, shipping, and PayPal fees.

Fork: Fox Factory 36, 150mm, FIT4 damper, Kashima
Shock: Fox Factory DPX2, 130mm, 185x55mm, Kashima
Seat post: Fox Factory Transfer internal seatpost, 150mm, Kashima
Dropper Remote: Bike Yoke
Headset: FSA No 42 ACB
Handle Bar: Deity Skywire carbon, 25mm rise, 35mm bore
Stem: Deity Copperhead, 50mm length, 35mm bore
Grips: Deity Knuckleduster
Pedals: Deity Bladerunner
Saddle: Deity Speedtrap
Seat Post Clamp: Norco design alloy nutted clamp
Front Brake: SRAM Guide RS Hydraulic, 180mm
Rear Brake: SRAM Guide RS Hydraulic, 180mm
Shifter Rear: SRAM GX Eagle
Rear Derailleur: SRAM XO1 Eagle
Cassette: SRAM X01 Eagle 10-50T
Chain: SRAM GX Eagle
Crankset: SRAM GX, 30t
Bottom Bracket: SRAM DUB PressFit BB92
Front Hub: Novatec sealed bearing 15x110mm Boost
Rear Hub: DT Swiss 370 sealed bearing 12x148mm Boost
Rear Axle: SRAM MAXLE
Spokes/Nipples: Sapim stainless, butted, secure lock nipple
Rims: WTB ST I29 TCS 2.0
Front Tire: Maxxis Minion DHF 2.5” WT EXO/TR, folding bead
Rear Tire: Maxxis Minion DHR II 2.4” WT EXO/TR folding bead
Serial #: VC18K03959