2017 Intense Primer 29 Pro Build

This has been a great bike to me, and I will be sad to see it go, but it's time for a new home. I am going back to a bigger travel bike, and I don't have room for this one. Everything works great, never had any problems with it and always kept it clean and lubed. I just had the fork rebuilt a new chain and new cables and housing run. The tires still have a lot of life left. Great bike!

The pictures show it with a wheel set that I am keeping. I am selling it with the stock wheels.

There are a few rock chips in the paint, but not many as I kept a layer of 3M film to protect the frame in areas that are prone to getting chipped.

Rear Shock FOX Performance Elite 34 Float, 3-position lever with open mode adjust, SV EVOL, 200mm x 50mm
Fork FOX Performance Elite 34 Float, 3-position lever with open mode adjust, 110mm x 15mm, Boost
Fork Travel 130mm
Headset Cane Creek 40
Handlebar ENVE, 760mm
Stem Thomson Elite X4, 50mm
Grips Troy Lee Designs
Brakes SRAM Guide Ultimate, 200mm front, 180mm rear
Brake Levers SRAM Guide Ultimate
Shifters SRAM X01 Eagle, 12 speed
Rear Derailleur SRAM X01 X-Horizon Carbon, Eagle, 12 speed
Cranks SRAM X01 Eagle, 12 speed
Chainring 34 tooth, direct mount
Bottom Bracket GXP, press fit
Pedals none
Chain SRAM XX1 Eagle, 12 speed
Cassette SRAM XG 1295 EAGLE 10-50 tooth, 12 speed
Rims DT Swiss M1700 SPLINE, Boost, tubeless ready
Hubs Front: 28 Hole DT Swiss 340, 110mm x 15mm, Boost Rear: 28 Hole DT Swiss 340, 148x12, Boost, XD driver, centerlock
Spokes DT Competition 2.0/1.8/2.0
Tires Maxxis Minion DHF 2.5" front, Maxxis Agressor 2.3" rear
Saddle Fabric Scoop Radius Pro
Seatpost FOX Transfer
Rear Dropout / Hub Dimensions 148mm x 12mm, Boost
Bottle Cage Mounts yes