2018 Yeti SB4.5 GX

NOTE: Bike no longer includes the carbon wheels/I9 hubs seen in photos and will instead have the factory DT Swiss Alloy wheelset (I will update with new photos shortly).

Looking to sell my 2018 Yeti SB4.5 GX. Bike was purchased in late 2018 and has just under 1,200 miles. Recently had maintenance done which included servicing the fork/shock, replacing brake pads, replacing the chain and servicing the Yeti Infinity Link (this was all done less than 150 miles ago).

The bike shows plenty of signs of wear including all of the normal scratches you’d expect on a used mountain bike. The most noticeable areas are a spot of missing paint on the non-drive side rear triangle and scratching on the rear brake lever (neither of these were from riding, but unfortunately were the result of loading the bike too close to another on a cross-country road trip; didn’t realize rubbing occurred until too late). These issues are purely cosmetic however, and it still rides great. The bike has factory clear frame protection in a number of areas so some of the scratching seen in the photos is only on that surface.

The bike includes a few upgrades, including Yeti Carbon Bars, a Race Face Turbine R Stem and an Ergon SM-Pro Saddle with Titanium rails. Most everything else is stock and listed below:

Frame: Yeti SB4.5 Carbon (non-Turq), size large, storm color
Shock: Fox Performance DPS (114mm travel)
Fork: Fox Performance 34 (140mm travel)
Front Axle: Fox Kabolt Boost Thru-Axle
Rear Axle: Yeti Cycles Bolt-On Boost Thru-Axle
Wheelset: DT Swiss M1900
Rear Derailleur: SRAM X01 Eagle
Cassette: SRAM 10-50 GX Eagle
Chain: SRAM GX Eagle
Crankset: SRAM GX Eagle 30T
Shifters: SRAM GX Eagle
Seatpost: Fox Transfer 30.9mm Dropper
Tires: Maxxis Ardent Evo TR (29x2.4 front, 29x2.25 rear)
Brakes: SRAM Guide R
Grips: Ergon GE1
Handlebar: Yeti Carbon (760mm)
Stem: Race Face Turbine R (50mm)
Saddle: Ergon SM Pro
Pedals: Race Face Chester Platform

Located in Atlanta, GA. Can ship if buyer covers costs.