61 CM Rivendell A. Homer Hilsen - dynamo light

Prev Next
Category: Road Bikes
Condition: Excellent
Frame Size: 61cm
Wheel Size: 700C
Material: Steel
Original Post Date: Dec-31-2021 2:45:53
Last Repost Date: Dec-31-2021 2:45:53
Still For Sale: Sold
View Count: 834
Watch Count: 5
Rivendell 61CM A. Homer Hilsen, with premium parts. I bought this frame some years ago (5 or 10?) on Ebay, I don't recall if it was sold as new, but the frame looks flawless to me. Sorry, I don't know when or where it was built, perhaps someone in the know could tell from the serial number maybe? I measure the seat tube at 61CM ctr-top, 59CM ctr-ctr. Top tube 59CM ctr-ctr. Standover height 86.5CM. Headtube 185MM.

I built it up several years ago with top end components, and it's been in heated storage since (except for a short test ride). It came with the Ultegra headset, everything other part is new (except the seatpost, and the Crank Brothers pedals, speaking of which I will replace with some flat pedals if you don't want them).

Paul Components: Racer Brakes, front and rear Cable Hangers.

Phil Wood: Rear Hub, Bottom Bracket (I'm pretty sure, didn't want to remove cranks and BB to be check).

Nitto: Lugged Quill Stem, Handlebar, Rear Rack, wire brake cable protector (for a rear bag).

TRP: Gummed Brake Levers.

Shimano: XT front derailleur, XT rear derailleur, XT cassette, Dura-Ace 9 speed bar end shifters (front shifter is friction only).

Sugino: Triple Crankset (175MM) with Silver chainrings.

Wheelset: Rich Lesnik built Velocity Synergy 36 hole, Compass 700C Snoqualmie Pass Extralite 44MM tires.

Deda Element: Bar Tape.

Thompson: Masterpiece setback Seatpost. (this may not be brand new, I see a scuff on it).

Selle-Anatomica: leather Saddle.

Yokozuna: brake cable housing.

King: Bottle Cages.

and a Bell.

Dynamo Light system: SON 28 front dynamo hub, B & M front light (with stand-light), B & M top light on the rear rack, wires/clips as pictured. I recently mounted the lights, but did not complete the wiring - the new owner may want to put the front light on a rack. I will include a cheap soldering iron and solder if you wish. You would need to procure electrical heat shrink wrap to complete the install (I like to fully enclose the wiring in this).

Will split shipping cost to the CONUS. Will remove the rear derailleur/chain for safe shipping. I take a lot of care to pack bicycles. Ship via FedEx ground insured.
$3,500 USD
Restrictions: Firm, No Trades, Will ship within continent only
(Seller History)

Member since Jul 30, 2021
Friday Harbor, United States

You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2022. Pinkbike.com. All rights reserved.
dv42 0.006711
Mobile Version of Website