2021 Yeti SB165

Selling my 2021 Yeti Sb165. So back in November of 2020 I bought the sb165 C2 in a medium. About 6 months later, I bought the turq frame in a small and swapped all the parts over. I went from a medium to small because I wanted to though it around a little more. I’m selling because I have my eye on another bike and didn’t ride this one as much I would have liked to. I upgraded the wheelset, handlebars, chain and stem. Bike is ridewrapped and 3m tape on cranks from day one. There are some minor scratches to the paint on the wheels. There is a scuff on the ridewrap on drive side downtube. No damage to frame (pictured). There is also a small paint chip between ridewrap and downtube protector (pictured). There are a couple scuffs/tears to the ridewrap under the bottom bracket. There’s looks to be a minor paint chip on one of the scuffs. On the underside of the rear triangle there are some more scuffs to the ride wrap and a tiny chip in carbon. All pictured

Asking 6200 obo, buyer pays PayPal fees and shipping. I’d consider selling the frame, fork, wheels, dropper and crankset.

Here’s the specs

Frame - Turq Series Carbon 165mm, Small

Shock - FOX Performance Elite DHX2 Coil, 2-position lever

Fork - FOX Performance 38 180mm

Headset - Cane Creek 40 IS

Shifters - SRAM GX Eagle, 12-speed

Rear Derailleur - SRAM GX Eagle, 12-speed

Crankset - SRAM GX Eagle

Chainring Size - 32t

Crank Arm Length - 170mm

Bottom Bracket - SRAM DUB PF92

Cassette - SRAM XG-1275 GX Eagle, 12-speed

Cassette Range - 10 - 52t

Chain - SRAM XX1 Black

SRAM GX Eagle, 12-speed

Brakes - SRAM Code R

Rotors - SRAM Centerline

Rotor Size - front, rear 200mm

Handlebar - Renthal Fatbar 35mm, cut to 780mm

Grips - ODI Elite Pro

Stem - Industry Nine A35, 40mm

Saddle - WTB Silverado

Seatpost - FOX Transfer 31.6mm, 150mm

Wheelset - Industry Nine Enduro S, 28 hole

Hubs - Industry Nine Hydra