2021 Yeti SB130LR - M, w/ Extras - Free Shipping
Category: Trail Frames
Seller Type: Private Seller
Condition: Excellent - Lightly Ridden
Frame Size: M
Wheel Size: 29"
Material: Carbon Fiber
Rear Travel: 135 mm
Seller Type: Private Seller
Condition: Excellent - Lightly Ridden
Frame Size: M
Wheel Size: 29"
Material: Carbon Fiber
Rear Travel: 135 mm
Original Post Date: Nov-03-2022 2:42:37
Last Repost Date: Apr-23-2023 12:25:47
Still For Sale: Sold
View Count: 1,795
Watch Count: 2
Last Repost Date: Apr-23-2023 12:25:47
Still For Sale: Sold
View Count: 1,795
Watch Count: 2
2021 Yeti SB130LR frame, 137mm rear travel. The stock DPX2 has very low miles (I used a different shock). This was a stock SB130 but has had the shock spacer removed, making it the lunch ride version.
Included with purchase is the rear axle, headset, and seat post collar clamp.
I'll also include the following extras:
Better Bolts gold titanium front and rear shock bolts (currently installed) - $37 value. The stock Yeti titanium bolts will also be included.
New, unused Yeti derailleur hanger - $30 value
New, unused Yeti bearing kit - $60 value
Yeti switch infinity grease gun - $30 value
SRAM DUB BB - $46 value
DPX2 air volume spacers
The frame is in excellent condition. It has not been crashed but does have a couple of small scuffs, which I'll call out now: there are small scratches on the rear end close to the axle. The driveside scratch may be visible in the photos but the non-drive side now has protective mastic tape over it. There is also a tiny scuff above the bottom bracket on the non-drive side which is also now covered in mastic tape. Most of the bike is covered and protected with a combination of AMS honeycomb protective film, Yeti's own protective clear film and customized mastic tape, especially around the bank end of the bike. It also has the Yeti shuttle guard on the down tube to protect the frame when loaded into the back of a truck. I take good care of my bikes and keep them clean and maintained.
The seat post, rear brake and bottom bracket pictured are not included but I can leave the housing in place for the dropper if that makes it easier for your installation.
If you need any components, please let me know. I have a set of Nox Composites wheels (Kitsuma front, Farlow rear) with orange Industry 9 Torch hubs and CXray bladed spokes that I'd be willing to sell for another $900
For the listed price, I will eat the paypal fee and cover the cost of shipping to the lower 48. With the extras, this saves well over $300 (probably more than $400 depending on shipping). Will accept $150 less for local pickup.
Photos always look terrible on PB so I am happy to text the full high res versions to you. Please let me know if you have any questions.
Included with purchase is the rear axle, headset, and seat post collar clamp.
I'll also include the following extras:
Better Bolts gold titanium front and rear shock bolts (currently installed) - $37 value. The stock Yeti titanium bolts will also be included.
New, unused Yeti derailleur hanger - $30 value
New, unused Yeti bearing kit - $60 value
Yeti switch infinity grease gun - $30 value
SRAM DUB BB - $46 value
DPX2 air volume spacers
The frame is in excellent condition. It has not been crashed but does have a couple of small scuffs, which I'll call out now: there are small scratches on the rear end close to the axle. The driveside scratch may be visible in the photos but the non-drive side now has protective mastic tape over it. There is also a tiny scuff above the bottom bracket on the non-drive side which is also now covered in mastic tape. Most of the bike is covered and protected with a combination of AMS honeycomb protective film, Yeti's own protective clear film and customized mastic tape, especially around the bank end of the bike. It also has the Yeti shuttle guard on the down tube to protect the frame when loaded into the back of a truck. I take good care of my bikes and keep them clean and maintained.
The seat post, rear brake and bottom bracket pictured are not included but I can leave the housing in place for the dropper if that makes it easier for your installation.
If you need any components, please let me know. I have a set of Nox Composites wheels (Kitsuma front, Farlow rear) with orange Industry 9 Torch hubs and CXray bladed spokes that I'd be willing to sell for another $900
For the listed price, I will eat the paypal fee and cover the cost of shipping to the lower 48. With the extras, this saves well over $300 (probably more than $400 depending on shipping). Will accept $150 less for local pickup.
Photos always look terrible on PB so I am happy to text the full high res versions to you. Please let me know if you have any questions.
$2,100 USD
Restrictions: Reasonable offers only, No Trades, Will ship within country only
Incline Village, United States Related Listings
|
|
|
|
|
|
|
|