2017 Whyte G160

For sale is my custom 2017 Whyte G160

Size small (approx 450mm reach, I'm 5,9 for reference and have found sizing perfect)


Started life as a G160s in yellow which I gradually got sick of, so had it paint stripped then I hand polished it to a satin finish.

I designed and produced some custom graphics which are printed on clear so also protect the frame.

The frame was rebuilt with a load of new parts and is as you see in the photos.


It's been ridden for around 12 months since the rebuild so has the odd light marks consistent with use


Current spec:

Sram GX 11 speed gears

Sram GX cranks

Sram Code R brakes w ceramic pads

Oneup Dropper 150mm

WTB i29 wheels

Spank Spike 777 FR Bearclaw Riser Vibrocore

Dmr Deathgrips

Rockshox Lyrik RCT3

Cane Creek inline coil (can't remember if it's a 400 or 350lb spring)

New Michelin Wild Enduro tyres f&r approx 2 rides old

Will either come with DMR V12 or Nukeproof Horizon pedals (I haven't decided which to keep yet)

WTB Koda saddle (nice saddle but has worn terribly so looks a bit hammered)


The chainstay bearing seats are snug but not tight (chainstay bearings wear fairly quickly on this frame design with hard riding) and I've used bearing retaining compound last change to avoid any movement, in doing so the rear end is solid with no play, I would recommend this for future bearing changes (this applies to chainstays only)


Serious interest only

Collection

Bank transfer payment