2019 Scott Gambler Custom build all new parts

Fully custom Gambler, frame professionally taken down to raw and clear coated. Professionally maintained. Brakes bled, Frame bearings and suspension serviced since last ride. Fresh pads front and rear and near fresh rear tire. Front is in good shape.

Components:
Fork: marzocchi bomber 58 (just rebuilt at Dirtlabs Suspension)
Shock: fox factory dhx2 (just rebuilt at Dirtlabs suspension)
Wheels: hope hub up front, Chris king in the rear. Syncros revelstoke dh rim up front and a velocity dually 26” in the rear. If you want 27.5 front and rear we can work something out.
Brakes: hope tech 3 v4 with vented rotors. These rotors alone go for $200 a pop and are in great shape still. The whole system is amazing and has virtually 0 fade over the steepest descents. Bike will be sold with extra brake pads.
Drivetrain: Raceface atlas cranks, reverse single speed setup. I have a sram gx dh drivetrain that I will sell with the bike. If you would prefer that installed, just let me know and I’ll swap it over at no extra cost.

The bike will be sold with the renthal bars and dmr death grips as well, unless you would prefer something with less rise. I have plenty of bars kicking around and we can work something out.

Every component on this bike, except for the cranks/bb/headset/rear hub, was installed new last February. I moved from out of state this summer and only saw about 6 days in the bike park, 2 of which were on a different bike. I’m selling because I have an enduro bike built up for this season and I can’t justify having this much money put into 2 similar bikes.
This thing shreds and it kills me to sell it. Be it park laps or trips to utah, this bike rips and will have you grinning from ear to ear. Like I said we can work out a 27.5 rear wheel but I honestly would recommend sticking with the mini mullet, there is too much fun to be had.

Message me with any questions. Cheers!