My 2017 remedy rsl build is finished. I had to switch from x2 to coil, cause the psi just went too high in the x2 with me weighing 250 pounds with all gear on. If somebody searches for x2 incl. hardware for remedy pm me please. With the coil and the increased travel the bike still pedals well and is a blast on downhills.
Looks awesome! what are the measurements on that shock? 230x60?
BigBlock427 wrote:
My 2017 remedy rsl build is finished. I had to switch from x2 to coil, cause the psi just went too high in the x2 with me weighing 250 pounds with all gear on. If somebody searches for x2 incl. hardware for remedy pm me please. With the coil and the increased travel the bike still pedals well and is a blast on downhills.
It's a size L (I'm 184 cm tall) and I have customized it a little (or a lot): - The stock bar and stem are gone for a Renthal fatbar carbon and a raceface atlas combo - Fork also has been swap for a 170mm 2018 fox 36 - Stock brakes and discs got changed for Shimano saints with xt rotors - tires replaced by Continental Der kaiser Protection front and Michelin Wild Grip Advanced Reinforced back
I got it 1 month ago but I'm still tuning it as just weeks before it arrived I managed to crash so hard that I got an AC separation grade III on my shoulder, braking my distal radius and two ribs in the process too. So basically just xc and mellow single tracks for me now .
So far so good, although I'm doubting if lower the fork to 160 to get some extra reach and run a shorter stem, also I'm thinking on extending the shock stroke to get a little bit more of travel in the rear
Thanks... Partlist is: Trek remedy rsl 2017 Dhx 2 230*60 - ends with nearly 160mm travel Ti spring in gold Fox 36 fit4 fast tuned 2017 non boost Dt 350 hubs Dt spokes Lightbicyles 40mm rims Maxxis dhr and dhf in 2.4 and 2.5 WT tubeless Saint brakes with Hope v2 rotors Fox transfer kashima Descendant Carbon Crank 28t Sram xo 11 Speed Sixc 35 810mm handelbare Race Face atlas stem Syncros am saddle Oury lock on grips Custom decals nl desings
My only concern is the piggyback reservoir. you guys with an X2, do you know how close the piggyback reservoir is from striking the downtube when fully compressed?
pAzk wrote:
230/60 works perfekt with the x2 float, think it should be no problem with the super deluxe