E13 chain guide

PB Forum :: Mechanics' Lounge
E13 chain guide
  • Previous Page
  • Next Page
Author Message
flag leekills
Posted: Dec 3, 2011 at 11:05 Quote
Hi all went to fit my e13 lg+ chainguide the Iscg 05 model today to 2011 yeti dj. but it seems like the bolts are to big any ideas or i'am just having a blonde moment. cheers
flag pbuser102331
Posted: Dec 3, 2011 at 11:07 Quote
The bolts that mount the guide to the your iscg tab ?
flag hampsteadbandit
Posted: Dec 3, 2011 at 11:26 Quote
you should get 2 lengths of bolts with your chain device (assuming you bought it new)

on some frames, the longer bolts will bottom out on the frame once screwed through the ISCG mount, so you have to use the short bolts

you generally use the longer bolts when adding lots of spacers between backplate and ISCG mount to get the spacing correct.
flag YetiSuperX
Posted: Dec 3, 2011 at 11:37 Quote
hampsteadbandit wrote:
you should get 2 lengths of bolts with your chain device (assuming you bought it new)

on some frames, the longer bolts will bottom out on the frame once screwed through the ISCG mount, so you have to use the short bolts

you generally use the longer bolts when adding lots of spacers between backplate and ISCG mount to get the spacing correct.

+1

I got a bag with different spacers and bolts. You should find them smaller bolts in that tiny bag.
  • Previous Page
  • Next Page

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.009086
Mobile Version of Website