Show your all mountain bike

PB Forum :: All Mountain, Enduro & Cross-Country
Show your all mountain bike
Author Message
Posted: May 28, 2019 at 8:50 Quote
pyromaniac wrote:
Supernex wrote:
badbadleroybrown wrote:
No upgrade on a bike makes a bigger difference than going from typical stock wheels to a good wheelset.
Any recommendation for something in the 45mm inner diameter range (for 27.5 2.8's) ??

It's inner WIDTH.

There are jurnos out there they don't know the difference!

Posted: May 28, 2019 at 13:42 Quote
Unbelievable bike! Pretty much perfect. Be ripe for AXS!
slayer2003 wrote:
Finally got the new HD4 built. Here is pic in the new rack too. Did first ride yesterday. The bike held up better than I did. Bike is awesome. Specs as follows:

Frame: 2019 Ibis Mojo HD4 27.5” Back in Black (XL)
Fork: 2020 Fox 36, GRIP2 EVOL 15x110 Boost Factory
Shock: 2019 Fox Float X2
Brakes: Code RSC (200mm front/180mm rear)
Cranks: Race Face Next R, 30T ring/170mm
Rear Derailleur: SRAM Eagle XX1
Shifter: SRAM Eagle XX1 trigger
Cassette: SRAM Eagle XX1 12 speed
Chain: SRAM Eagle X01 12 speed
Pedals: Deity T-Mac
Stem: Industry Nine 35, 40mm
Handlebar: Race Face SixC (cut to 800mm)
Seatpost: Bike Yoke (185mm)
Saddle: SDG Radar
Bottom Bracket: Chris King
Headset: Cane Creek 110
Grips: Race Face Grippler
Bash/Guide: AMg Carbon
Front Tire: Maxxis DHF 2.5 Tubeless
Front Wheel Nox Kitsuma (36mm internal width)
Front Hub: Industry Nine Hydra 15x110mm Boost 32H Front
Rear Tire: Maxxis DHRII 2.4 Tubeless
Rear Wheel: Nox Kitsuma (36mm internal width)
Rear Hub: Industry Nine Hydra 12x148mm Boost 32H

Weight: 31.3#


Posted: May 28, 2019 at 15:58 Quote
Supernex wrote:
badbadleroybrown wrote:
No upgrade on a bike makes a bigger difference than going from typical stock wheels to a good wheelset.
Any recommendation for something in the 45mm inner diameter range (for 27.5 2.8's) ??
Derby https://www.derbyrims.com/leader-of-rim-design.html

Posted: May 28, 2019 at 17:06 Quote
I have a wheel building question. I have a rear wheel that I destroyed the rim on. I have a warranty replacement rim that I'm going to install. If I went from my current Novatec hub to a DT Swiss 240 would I have to change spokes? I found a deal on a hub so now seems like the time to change it if it's not too much hassle. thanks!

Posted: May 28, 2019 at 17:09 Quote
whitebirdfeathers wrote:
I have a wheel building question. I have a rear wheel that I destroyed the rim on. I have a warranty replacement rim that I'm going to install. If I went from my current Novatec hub to a DT Swiss 240 would I have to change spokes? I found a deal on a hub so now seems like the time to change it if it's not too much hassle. thanks!

Very likely, yes.

Posted: May 28, 2019 at 17:39 Quote
whitebirdfeathers wrote:
I have a wheel building question. I have a rear wheel that I destroyed the rim on. I have a warranty replacement rim that I'm going to install. If I went from my current Novatec hub to a DT Swiss 240 would I have to change spokes? I found a deal on a hub so now seems like the time to change it if it's not too much hassle. thanks!

Duh.... nevermind hubs... not rims :facepalm....

If flange is the same you might get lucky

Posted: May 28, 2019 at 18:17 Quote
whitebirdfeathers wrote:
I have a wheel building question. I have a rear wheel that I destroyed the rim on. I have a warranty replacement rim that I'm going to install. If I went from my current Novatec hub to a DT Swiss 240 would I have to change spokes? I found a deal on a hub so now seems like the time to change it if it's not too much hassle. thanks!
you could probably get away with reusing the spokes, but if you want to replace the hub anyway then just go for the upgrade.

Posted: May 28, 2019 at 18:30 Quote
Devinci Troy Carbon.

Group Set : complete XX1 11 speed
Brakes : Sram Guide Ultimate with Ti piston upgrade and goodridge Hose kit
Cockpit : Enve HDH , Reverse Components Black 1 35mm
Wheel Set : DT Swiss m1700 with 54t ratchet , F magic mary , R nobby nic
Seat post and saddle : RS reverb , SDG circuit carbon
Fork : RS pike 150mm , Rockguardz carbon mudguard
Pedals : Reverse Black One Titanium


Posted: May 29, 2019 at 0:03 Quote
slayer2003 wrote:



All I see is a Mushroomhead sticker!! Big Grin

Posted: May 29, 2019 at 0:31 Quote
v7fmp wrote:
slayer2003 wrote:



All I see is a Mushroomhead sticker!! Big Grin

HAHA! YEP!

Posted: May 29, 2019 at 14:33 Quote
I find this site's really helpful for wheel building.
https://www.prowheelbuilder.com/spokelengthcalculator

Posted: May 29, 2019 at 14:50 Quote
metaam wrote:
I find this site's really helpful for wheel building.
https://www.prowheelbuilder.com/spokelengthcalculator

Rad! Thanks Man.

Posted: May 30, 2019 at 3:03 Quote
Som minor updates on the Slash. Really impressed with the Ribbon. 10/10 would buy again. The seattube angle is just stupid thoConfused
My Trek Slash XX1 eagle Stans Bravo Carbon wheels Hope E4 MRP Ribbon

Posted: May 30, 2019 at 5:25 Quote
larscha-nsfr wrote:
Som minor updates on the Slash. Really impressed with the Ribbon. 10/10 would buy again. The seattube angle is just stupid thoConfused

what do you mean? like difficult to climb with?

Posted: May 30, 2019 at 5:45 Quote
sosburn wrote:
larscha-nsfr wrote:
Som minor updates on the Slash. Really impressed with the Ribbon. 10/10 would buy again. The seattube angle is just stupid thoConfused

what do you mean? like difficult to climb with?

Alot of supertech climbing here in the north. Have to constantly adjust my weight to the front of the seat when climbing to keep the frontwheel from lifting. Have testridden the Sentinel and that beats the Slash going up and down Wink Still an awesome bike tho, just could be better.


 
Your subscriptions
no posts

Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv65 0.023135
Mobile Version of Website