Got Any DH Questions? Ask Them Here

PB Forum :: Downhill
Got Any DH Questions? Ask Them Here
Author Message
Posted: May 19, 2019 at 13:28 Quote
What about a wtb trailboss tough fast rolling?

Posted: May 19, 2019 at 16:53 Quote
also there's the spesh slaughter, sometimes I run one on the rear and it measures up to the front 2.5 non-wt minion dhf pretty well.

edit, did Schwalbe stop making the rock razors in 26?

Posted: May 19, 2019 at 18:54 Quote
Cambriabike.com has the double down 120 tpi for 68$

Posted: May 19, 2019 at 20:58 Quote
what would be the spoke length of a 26er Spank Spoon rim with a Hope pro 4 hub? is there any way i can accurately measure it?

EDIT: I just found this website

https://www.sapim.be/spoke-calculator

Hopefully it's accurate! Smile

would like to hear more opinions though.

Thanks.

Posted: May 19, 2019 at 21:32 Quote
well used 2011 devinci wilson ? too old?

Posted: May 19, 2019 at 22:27 Quote
bdcain wrote:
well used 2011 devinci wilson ? too old?

Well used? If the bearing slots aren't ovalled then dad gum I think ur good to go

Posted: May 19, 2019 at 23:30 Quote
I would never buy a well used DH bike period.

Posted: May 20, 2019 at 1:23 Quote
Hey guys, does anyone knows if the new boxxer crown is compatible with the older ones (2016)?

Posted: May 20, 2019 at 1:35 Quote
bdcain wrote:
well used 2011 devinci wilson ? too old?
If the bearings are good then it should be fine just check the frame over carfully

Posted: May 20, 2019 at 3:00 Quote
dhmtbr777 wrote:
I would never buy a well used DH bike period.

well i bought a well used 2014 Undead with a small delamination close to the BB over a year ago and haven't had a problem. Although i'm a 110lb guy, but i ride as hard as i can and i don't hold back on it, i smash that bitch everywhere.

Posted: May 20, 2019 at 3:33 Quote
I bought Dean Lucas ex World Cup Devinci Wilson. That frame did a full season. Had no qualms about purchasing it at all.

I supposed it would have been slightly better maintained then the average punters bike Smile

Posted: May 20, 2019 at 4:06 Quote
bdcain wrote:
well used 2011 devinci wilson ? too old?
after 8 years, the frame will be fatigued badly.... I wouldn't bother

Posted: May 20, 2019 at 10:06 Quote
ibishreddin wrote:
bdcain wrote:
well used 2011 devinci wilson ? too old?

Well used? If the bearing slots aren't ovalled then dad gum I think ur good to go

My mate had a wilson and the main pivot bearing was constantly failing to the point that, as you say, mega ovalising, horrific creaking, not good.

O+
Posted: May 20, 2019 at 19:36 Quote
Does anyone know why riding DH/park kills derailleurs? Myself and 2 of my friends bent our derailleurs yesterday. No crashing.

O+
Posted: May 20, 2019 at 19:38 Quote
ThunderChunk wrote:
Does anyone know why riding DH/park kills derailleurs? Myself and 2 of my friends bent our derailleurs yesterday. No crashing.
chains too short? Riding like a hack?


 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.019874
Mobile Version of Website