Norco Team DH/DH/Aline//Atomik 2010/2011 owners thread

PB Forum :: Norco
Norco Team DH/DH/Aline//Atomik 2010/2011 owners thread
Author Message
Posted: Jun 15, 2015 at 13:21 Quote
connorvlc wrote:
Hi can anybody tell me where the serial number is on a 2010 Norco atomik thanks
should be on the bottom bracket beside the chain guide mount adapter.

Posted: Jun 19, 2015 at 6:52 Quote
Hi, just wanted to let you all know that i'm selling my 2010 Team DH as a frame only. Comes with rear axle, seat clamp, bottom bracket/cranks (Hussefelt). If you are interested, PM me.


Posted: Jun 25, 2015 at 14:33 Quote
this bike still serve you dude?i heard its been recall

Posted: Jun 25, 2015 at 14:37 Quote
good bike?norco team dh 2008


Posted: Aug 3, 2015 at 17:12 Quote

Made some upgrades to the bike.

Frame : Team DH 2010 Painted in Matte Black with Black Decals

Fork : 2015 Marzocchi 380 CR

Rear Shock - 2014 Kage RC

Wheels - 2014 Mavic Deemax Ultimate Wheelset

Brakes - 2014 Elixr 7 Trail with 8 Inch Avid Rotors

Drivetrain - 2014 X0 components, 9 speed.

Handlebar - Raceface Atlas, 780 mm Uncut

Cranks - Shimano Zee

Posted: Sep 7, 2015 at 15:19 Quote
Hi........I am replacing the all bearings in my 2011 Team DH. Does anyone have know the size of these bearings?

Posted: Sep 20, 2015 at 5:12 Quote
Pcon wrote:
Hi........I am replacing the all bearings in my 2011 Team DH. Does anyone have know the size of these bearings?

Just pull the bearings out and take to a local bearing dealer mine had them in stock excep the small ones at back of rear triangle because spacers are built into the bearing

Posted: Sep 21, 2015 at 17:24 Quote
unwindingcarrot wrote:
Pcon wrote:
Hi........I am replacing the all bearings in my 2011 Team DH. Does anyone have know the size of these bearings?

Just pull the bearings out and take to a local bearing dealer mine had them in stock excep the small ones at back of rear triangle because spacers are built into the bearing

you can also by the complete kit off ebay if you hunt around, seen a few pro kits on ebay too.

Posted: Sep 21, 2015 at 22:40 Quote
Hey can anyone tell me if my 2010 Team dh is ISCG or ISCG05?

Posted: Sep 22, 2015 at 5:53 Quote
dash34 wrote:
Hey can anyone tell me if my 2010 Team dh is ISCG or ISCG05?

it's ISCG '05

Posted: Sep 22, 2015 at 5:54 Quote
my 2010 team dh custom.


Posted: Sep 29, 2015 at 21:36 Quote
Sick found everything to make my custom 200mm travel RC2X shiver into a RC2-RC3 Shiver may go the RC2 dual but we`ll see hahaha.
But going to be a whole new revamp for the team DH 3 ideas to do,
Complete black Stealth with just manufacturing logo`s in color.
50-50 in gold and red with logo`s.
75% gold little red with logo`s.

The base color of the frame will be complete black, may try to save the white but not too sure yet.
Any suggestions guys can always be changed to something else later since I do all my own work and most is done by hand.

Posted: Dec 19, 2015 at 15:18 Quote
Hi guys,
I recently changed my norco six1 on 2010 team dh.i got used to fox dhx3.0 coil (550lbs x 2.35" and i felt it perfect)on my last bike but this1 came with rockshox vivid air and i feel like is to much technology involved in setting up.i am thinking about going back to coil rearshock.
What would you recommend for 2010 model(bear in mind i am 16 stone rider and i like big drops and hits).
Thanks

Posted: Dec 29, 2015 at 11:03 Quote
Can anyone recommend a headset for the Norco team DH 2009 to fit 1 1/8 steerer, thanks.

Posted: Dec 30, 2015 at 8:32 Quote
rkerslake wrote:
Can anyone recommend a headset for the Norco team DH 2009 to fit 1 1/8 steerer, thanks.

FSA is pretty good, my fav and plan to purchase is a cranecreek they have to be an integrated headset.


 
Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv65 0.027531
Mobile Version of Website