Norco Team DH/DH/Aline//Atomik 2010/2011 owners thread

PB Forum :: Norco
Norco Team DH/DH/Aline//Atomik 2010/2011 owners thread
| Next Page
Author Message
Posted: Dec 30, 2015 at 8:36 Quote
Ninjapk23 wrote:
Hi guys,
I recently changed my norco six1 on 2010 team dh.i got used to fox dhx3.0 coil (550lbs x 2.35" and i felt it perfect)on my last bike but this1 came with rockshox vivid air and i feel like is to much technology involved in setting up.i am thinking about going back to coil rearshock.
What would you recommend for 2010 model(bear in mind i am 16 stone rider and i like big drops and hits).
Thanks

any 9.5X3.0 spring is good, a rockshox rc2 or my fav that I run is a Marz Roco WC, the DHX 5.0 are not bad just make sure u get the right shock for it I need one for my A-Line once my team Dh is fully completed.

Posted: Dec 30, 2015 at 10:48 Quote
traveleon wrote:
rkerslake wrote:
Can anyone recommend a headset for the Norco team DH 2009 to fit 1 1/8 steerer, thanks.

FSA is pretty good, my fav and plan to purchase is a cranecreek they have to be an integrated headset.

Yeah I have an FSA on my bike at the moment and feels great.

http://www.chainreactioncycles.com/fsa-orbit-z-no-9mcup-cc-headset/rp-prod51070

Would the headset I have linked above fit or can you link others that will fit, Thank you.

Posted: Dec 30, 2015 at 11:48 Quote
rkerslake wrote:
traveleon wrote:
rkerslake wrote:
Can anyone recommend a headset for the Norco team DH 2009 to fit 1 1/8 steerer, thanks.

FSA is pretty good, my fav and plan to purchase is a cranecreek they have to be an integrated headset.

Yeah I have an FSA on my bike at the moment and feels great.

http://www.chainreactioncycles.com/fsa-orbit-z-no-9mcup-cc-headset/rp-prod51070

Would the headset I have linked above fit or can you link others that will fit, Thank you.

Should fit they are not exactly 50mm it's like 49.61mm or something these are the 2 pieces I plan to get.

http://www.chainreactioncycles.com/ca/en/cane-creek-40-series-ec49-40-bottom-assembly/rp-prod115640

http://www.chainreactioncycles.com/ca/en/cane-creek-10-series-zs49-28-6-top-assembly/rp-prod137062

just trying to finish up my pc mod though so it'll have to wait.

Posted: Dec 30, 2015 at 12:01 Quote
traveleon wrote:
rkerslake wrote:
traveleon wrote:


FSA is pretty good, my fav and plan to purchase is a cranecreek they have to be an integrated headset.

Yeah I have an FSA on my bike at the moment and feels great.

http://www.chainreactioncycles.com/fsa-orbit-z-no-9mcup-cc-headset/rp-prod51070

Would the headset I have linked above fit or can you link others that will fit, Thank you.

Should fit they are not exactly 50mm it's like 49.61mm or something these are the 2 pieces I plan to get.

http://www.chainreactioncycles.com/ca/en/cane-creek-40-series-ec49-40-bottom-assembly/rp-prod115640

http://www.chainreactioncycles.com/ca/en/cane-creek-10-series-zs49-28-6-top-assembly/rp-prod137062

just trying to finish up my pc mod though so it'll have to wait.



So to quote from the website:

Features:
• Internal headset
• Deep Alloy cups fit into 50mm OD headtube. ID: 44mm, OD: 50mm.
• Very low profile, designed primarily for ATBs.
• Patented alignment tip for increased durability and performance.
• TH brand 36 degree micro angular contact bearings, 7075 aluminium crown race and aluminium top cap


Where it says "Deep Alloy cups fit into 50mm OD" That is actually the internal diameter of the head tube not the outside as "OD" would surgest?

What mods are you doing to your pc?

Thank you for the help!

Posted: Dec 31, 2015 at 5:46 Quote
I used the Cane Creek headset finder and found the measurements I was looking for and it turns out that headset wouldn't fit but either a mix and match from Cane Creek or Hope would so I think I'll be getting the Hope

Posted: Jan 1, 2016 at 8:35 Quote
rkerslake wrote:
I used the Cane Creek headset finder and found the measurements I was looking for and it turns out that headset wouldn't fit but either a mix and match from Cane Creek or Hope would so I think I'll be getting the Hope

Yeah bad part about heasets unless you pop it out and measure for sure you could get the wrong one, that one you listed is pretty well the same as oem but I found them to get sloppy quickly.
I used the Crane Sizer myself and found those two parts to be listed as a fit, rather a better product and specially if they list it to fit.

Haha a lot, rebuilt my entire case and decked it out with extra room for water cooling.
Asus Sabertooth X58 motherboard.
going to upgraded my i7 950 quad cpu to a i7 970 six core, going from 12gb 1600mhz corsair memory to the 24gb 1866mhz plus the airflow cooler.
just got a new gtx 970 4gb reference video card getting a new Corsair intelligence power supply next.
Big ones are my water coolers a Corsair h100i for my cpu and a Corsair h105 for my video card.
2 X intel 240gb ssd's, 1 X 120gb OCZ Agility 3 ssd, 6 X 2tb SSHD hybrid drives.
plus all white and green custom led lighting.
to most this list is mumbo jumbo but to any who do their own video editing might like the spec's maybe post a picture once I'm done or at least a little further along.

very expensive project but will be worth it to edit my 4k biking video's and play any game out there, get ultra high settings on Fallout 4 which I read was pretty tough too do unless you've dumped a whack of cash for your pc.

my current windows 7 assessment score is.
7.5 - cpu
7.7 - memory
7.9 - video
7.9 - gaming experience
7.6 - hard drive

Max score you can get is 7.9 Smile almost maxed

Posted: Jan 21, 2016 at 14:21 Quote
Unsecure image, only https images allowed: http://up.picr.de/22753910jo.jpgUnsecure image, only https images allowed: http://up.picr.de/24352364da.pngUnsecure image, only https images allowed: http://up.picr.de/24352362ha.png
Norco Team DH reconstruction. I found the frame in August last year on eBay Classifieds. No cracks, no dents.
Meanwhile, the Norco Team DH is ready to ride again.

Posted: Sep 6, 2016 at 16:35 Quote
Hey guys could anyone tell me the exact size of the 2011 norco dh frames BB? Thanks

Posted: Sep 6, 2016 at 18:11 Quote
ivanjumpstyle wrote:
Hey guys could anyone tell me the exact size of the 2011 norco dh frames BB? Thanks

68-73

Posted: Jul 14, 2017 at 5:47 Quote
OscaDaGrouch78 wrote:
New Concept Norco Team DH

Posted: Jul 14, 2017 at 5:47 Quote
jonnyhill2011 wrote:
OscaDaGrouch78 wrote:
New Concept Norco Team DH

Very nice and different great build. Is it a team dh ?

Posted: Oct 9, 2017 at 20:36 Quote
I am having troubles finding a derailleur hanger for my 2011 Norco Team DH, any idea where I can find one?

Posted: Jul 15, 2018 at 10:49 Quote
Hi does any one know the size headset and bearings I need for my Norco dh 2010 im going to send my forks for service and would like to replace headset and bearings whilst I've got it apart or if someone has a link to a site where i could purchase the correct set. The forks are a straight stem not tapered.
Any help would be very much appreciated.

| Next Page

 
Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv65 0.020798
Mobile Version of Website