EVIL Undead

PB Forum :: Downhill
EVIL Undead
Author Message
Posted: Jun 11, 2017 at 1:21 Quote
Here's my beauty, finally.
I thought my Revolt was the perfect bike, but this one is just incredible.
What
A
Bike

Posted: Jun 11, 2017 at 2:11 Quote
Sick! That fork plays so well on the frame, nice job.

Posted: Jul 15, 2017 at 6:55 Quote
Anyone have a rear axle cap. The left hand threaded cap that covers he axle in the frame? Long shot but.....

Posted: Jul 15, 2017 at 8:32 Quote
check with evil they came on here a while ago saying they could still do all the parts just not carbon parts.

Posted: Aug 14, 2017 at 16:06 Quote
im going to see if I can figure out a new design for the rear axle

Posted: Aug 27, 2017 at 12:25 Quote
Hi Guys,

I have gotten an Ohlins 2014 TTX 22 shock for my Undead, but don´t have the right shock mount for the frame. The mounting hardware on the ohlins doesnt fit my frame neither.

I don't have frame on hand for measuring atm unfortunately. If I am correct, the upper and lower shock bolts for the frame are 8mm, right? Beside that, does anybody know the width, and if i can run the spherical bearing Ohlins offers?
Can I just use the old ball joint, and replace the outer with this kit?
https://www.bike-components.de/en/OeHLINS/TTX-22-M-MTB-Universal-8-mm-Ball-Joint-Mounting-Kit-p54304/

Or this:
https://www.bike-components.de/en/OeHLINS/TTX-22-M-MTB-Universal-8-mm-Bushing-Mounting-Kit-p54302/

Thanks in advance!

Posted: Nov 28, 2017 at 21:52 Quote
Evil is back I have been ordering parts for mine for ages they make small batches of specific parts to order like linkages piviots bearings axles etc and they are great dont listen to the people underneath you can order parts and evil seems to back and are sourcing parts for those of us riding the undead which is in my opinion still my favourite downhill bike i have ever owned

Posted: Jul 4, 2018 at 4:53 Quote
Hi,

Does anybody know the size of the small pivot bearings? not the rocker, nor the big pivot bearing, but the four small ones, if that makes any sense?
Anyway, one of those are completely broken on my undead, and I´m in the middle of a biking trip, so I don't have time to order a full bearing kit from the UK right now. If anybody has the measurements I might be able to find a standard bearing as a temporary solution.

Thanks in advance!

Posted: Jul 4, 2018 at 9:38 Quote
NoiNPO wrote:
Hi,

Does anybody know the size of the small pivot bearings? not the rocker, nor the big pivot bearing, but the four small ones, if that makes any sense?
Anyway, one of those are completely broken on my undead, and I´m in the middle of a biking trip, so I don't have time to order a full bearing kit from the UK right now. If anybody has the measurements I might be able to find a standard bearing as a temporary solution.

Thanks in advance!

You mean the bearings for the two dogbone links, right?
If that's what you're looking for then you have to buy Enduro Max Bearing replacement for the spherical bearings in the Delta Link:
http://www.enduroforkseals.com/id169.html
I bought them at MB Bearings:
http://mbbearings.co.uk/catalog/index.php?main_page=product_info&cPath=3&products_id=941
They even have the full 8 bearings kit for the whole Delta Link:
http://mbbearings.co.uk/catalog/index.php?main_page=product_info&cPath=19_74&products_id=943

Posted: Aug 20, 2018 at 17:43 Quote
i need an axle for my undead, does anybody knows where can i get one or some other axle that works?

Posted: Aug 20, 2018 at 18:17 Quote
MetalheadWolfRider wrote:
i need an axle for my undead, does anybody knows where can i get one or some other axle that works?

I heard a shimano axle will work

Posted: Aug 21, 2018 at 11:55 Quote
Message Evil. They have some parts that they've made in small batches. I bought the axle cap recently.

Posted: Nov 25, 2018 at 21:33 Quote
seems like as good a place as any to post these:
https://www.pinkbike.com/buysell/2480139/
5 x linkage bolts. Useless to me but better not chucked out!

Posted: Jan 26, 2019 at 11:11 Quote
I’m building up an Evil Undead and I’m wondering if someone can tell me which way the headset cups go to adjust the headangle. If I want it in the steep setting does steep face to the front or the back of the frame?

Thanks.

Posted: Mar 10, 2019 at 16:32 Quote
Shiny-side-up wrote:
laxman2001 wrote:
Do the flip chip bolts wear that easily? Or is it just that they're unique that everyone wants them?

If you don't grease them really well the heads can come off when you try to remove them, also don't even think about installing them without a calibrated torque wrench because the same thing will happen.

I had this happen with the bolt head breaking off while I was building up my frame yesterday, does anyone know where I can get a replacement?


 
Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv65 0.022600
Mobile Version of Website