again.. about those cr/ncr travel spacers. They are really hard to get in europe at the moment. Hack or optional spacer ideas needed.
I am having 55 CR with 10 and 20mm spacers inside. 140mm travel at the moment. I would like to use that fork in my up coming dirt jump/ bmx track hardtail, with 100mm travel.
some pvc pipe? Spacer from another brand?
I would also love to buy spacer, if anyone have them for sale. Or link in some online shop, with spacers in stock would be a treat.
MARZOCCHI 55- Stanchions- are they all the same? Can I swap the stanchions from the Micro Switch with the RC3 evo2 TI etc? I need a longer steerer tube, and I'm not worried about colours etc, What stanchions/steerer will fit the RC3 evo2 ti? so I can just swap the internals and maybe add or leave a spacer
What is the length of the 55 rc3 evo ti v2 spring? any photos of it? and does it have red paint mark under the shrinkwrap?
It's 285 mm if I recall correctly. Can measure it exactly if you need great precision. Spring on the 160 mm and 170 mm MZ forks is the same. The 55 RC3 Evo Ti V2 spring also fits in the 350 NCR Ti.
What is the length of the 55 rc3 evo ti v2 spring? any photos of it? and does it have red paint mark under the shrinkwrap?
It's 285 mm if I recall correctly. Can measure it exactly if you need great precision. Spring on the 160 mm and 170 mm MZ forks is the same. The 55 RC3 Evo Ti V2 spring also fits in the 350 NCR Ti.
spings in a 160mm 55 RC3 and 170mm 55 RC3 V2 Evo I had were not the same?....
What is the length of the 55 rc3 evo ti v2 spring? any photos of it? and does it have red paint mark under the shrinkwrap?
It's 285 mm if I recall correctly. Can measure it exactly if you need great precision. Spring on the 160 mm and 170 mm MZ forks is the same. The 55 RC3 Evo Ti V2 spring also fits in the 350 NCR Ti.
spings in a 160mm 55 RC3 and 170mm 55 RC3 V2 Evo I had were not the same?....
The MZ drawings list the same spring for the 170 mm 55 RC3 V2 Evo and for the 350 NCR Ti 160 mm. Moreover, the 2017 170 mm NCR Ti has the same spring as the 160 mm 2015 model. I've fitted a 55 170 mm travel spring in an 160 mm 350 NCR Ti no problem at all. Also run a 2017 350 NCR Ti 170 mm reduced to 160 mm. Have not changed the spring. Works very sweet.
It's 285 mm if I recall correctly. Can measure it exactly if you need great precision. Spring on the 160 mm and 170 mm MZ forks is the same. The 55 RC3 Evo Ti V2 spring also fits in the 350 NCR Ti.
spings in a 160mm 55 RC3 and 170mm 55 RC3 V2 Evo I had were not the same?....
The MZ drawings list the same spring for the 170 mm 55 RC3 V2 Evo and for the 350 NCR Ti 160 mm. Moreover, the 2017 170 mm NCR Ti has the same spring as the 160 mm 2015 model. I've fitted a 55 170 mm travel spring in an 160 mm 350 NCR Ti no problem at all. Also run a 2017 350 NCR Ti 170 mm reduced to 160 mm. Have not changed the spring. Works very sweet.
How did you lower the 170 Ti to 160mm travel, Ibex? Thanks!
spings in a 160mm 55 RC3 and 170mm 55 RC3 V2 Evo I had were not the same?....
The MZ drawings list the same spring for the 170 mm 55 RC3 V2 Evo and for the 350 NCR Ti 160 mm. Moreover, the 2017 170 mm NCR Ti has the same spring as the 160 mm 2015 model. I've fitted a 55 170 mm travel spring in an 160 mm 350 NCR Ti no problem at all. Also run a 2017 350 NCR Ti 170 mm reduced to 160 mm. Have not changed the spring. Works very sweet.
How did you lower the 170 Ti to 160mm travel, Ibex? Thanks!
Hello! By adding a spacer, which comes with all Ti forks purchased retail. (Boxed version). There is one video guide online. Google "350 NCR Travel change". Procedure is the same for the NCR Ti. Just pay attention not to use the 20 mm spacer, but a 10 mm one. (Spring will be preloaded too much if shortening the travel by 20 mm. In this case you'll need a shorter spring.) The 170 mm and 160 mm forks use the same spring length, so no problem at all going from 170 to 160 mm.