Ns bikes rns fork help

PB Forum :: Dirt Jumping & Street
Ns bikes rns fork help
  • Previous Page
  • Next Page
Author Message
flag coco1313
Posted: Feb 10, 2014 at 16:08 Quote
hi, i just got my new rns fork with the washerlock dropouts system but there is no washers is this how its suposed to be? i will be running it with a rotary front hub

this is what it looks like

https://www.pinkbike.com/photo/10601248/
flag mattboltz
Posted: Feb 10, 2014 at 20:55 Quote
Hey dude, that fork is designed for 10mm hubs. Basically if you have a 20mm hub you're out of luck or will have to run some sort of adapter. 10mm axles are included with the hub, where 20mm axle comes with the fork. Hope this clears it up. This is what you need. http://www.lamacycles.com/en/2014-ns-bikes/hubs/ns-rotary-10-hub
flag coco1313
Posted: Feb 10, 2014 at 22:32 Quote
I already have the hub purchased with the fork
But the description online says it uses washers in the dropouts
flag mattboltz
Posted: Feb 11, 2014 at 20:21 Quote
Pretty sure the bolts on the hub are designed for that fork.. no need to run washers.
flag doughnutSpaghetti
Posted: Feb 12, 2014 at 8:48 Quote
Just run up to a hardware store and get some washed. 3/8" are easy to find. 10mm can be found at most stores too.
flag coco1313
Posted: Feb 12, 2014 at 19:53 Quote
thx so much for the help!!!! that is what i thought thx guys!
flag erikthefatty
Posted: Feb 14, 2014 at 12:05 Quote
There you go. I'm running the Fundamental, but mine came with the washers. Like Doughnut said, just go pick some up from the hardware store. I love that system. Gives me a little peace of mind.
  • Previous Page
  • Next Page

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv42 0.010835
Mobile Version of Website