You know they're thread the other way for a reason..
Not sure it will cause any problems or not.
its supposed to stop the cups undoing themselves i think,but you'd think with the pedal rotation direction,it would undo them,this thread has got me confused.
You know they're thread the other way for a reason..
Not sure it will cause any problems or not.
its supposed to stop the cups undoing themselves i think,but you'd think with the pedal rotation direction,it would undo them,this thread has got me confused.
Yeah I thought that too. But apparently that's not the case. When set up correctly and working as it all should be: The cups are supposed to stay tight when pedaling and if the bearings seize then the cups will loosen.
Is it possible they welded the tube the wrong way around. In which case they must thread the tube before they weld it together....
hope mines ok,I'm building it up tomorrow,I'll just bang the bb in anyway,feel sorry for the guy being overseas,I'm only 30mins away,I can just go down to the store and kick off
Did this thread in right hand or left hand? because either the "L" or the "Tighten" and arrow have to be wrong, one or the other. If it was right hand the bb would be fine.
You know they're thread the other way for a reason..
Not sure it will cause any problems or not.
its supposed to stop the cups undoing themselves i think,but you'd think with the pedal rotation direction,it would undo them,this thread has got me confused.
Yeah I thought that too. But apparently that's not the case. When set up correctly and working as it all should be: The cups are supposed to stay tight when pedaling and if the bearings seize then the cups will loosen.
yeah thread direction designed to prevent tightening during normal use same as pedals.
Did this thread in right hand or left hand? because either the "L" or the "Tighten" and arrow have to be wrong, one or the other. If it was right hand the bb would be fine.
naahh bb shell is front to back left to right. just slam handlebar into seat tube saddle in the fork steerer. should be fine steer with ya bum cheeks works ok not the best over off camber rooty stuff but flow lines..
I was talking about this in another forum and a guy from On-One contacted me and said he'll get it sorted for you..He has you on the system.. OK..
Maybe because it's an Australian specific model??..does that make any sense
I would love for them to just send me a frame.
I had to escalate my PayPal dispute with them to a claim because it was about to time out due to a lack of action on their part, at the moment it looks like I'll have to send the order back for a refund if nothing changes.
This would mean I'd have to pay return shipping and combined with the exchange rate changes actually mean I would be out of pocket the price of the frame.