Bearings for YT Industries Capra: Sizing and Source

PB Forum :: Tutorials
Bearings for YT Industries Capra: Sizing and Source
| Next Page
Author Message
Posted: Dec 13, 2016 at 13:51 Quote
The extended inner race on the Horst link bearings should face each other. I hunted for an answer for this to no avail so got yt to confirm how they should sit

Posted: Oct 1, 2019 at 11:28 Quote
Hi can anyone help....
I'm after the sizes and codes for top and bottom headset bearings and seals for my 2018 Al capra, also what's best to swap out for and wheres best to find them...?
Thanks in advance....

Posted: Jul 21, 2020 at 6:54 Quote
Rhy wrote:
Hi can anyone help....
I'm after the sizes and codes for top and bottom headset bearings and seals for my 2018 Al capra, also what's best to swap out for and wheres best to find them...?
Thanks in advance....

Wych bearings are a good uk supplier if your still looking

Posted: Jul 21, 2020 at 6:55 Quote
steviebaxter wrote:
Took me a while to track this information down and confirm with YT. They were very helpful and have confirmed everything below. I thought I'd post it in case anyone else is trying to find the info.

Bearing sizes (with YT industries codes for bearings)

Note the YT industries exploded diagram for the Capra has an incorrect size for the Horst Link bearing (they are going to change it)

Front linkage Bearing 7902
7902 - 2RS 15 x 28 x 7mm
Rear Linkage Bearing
609 - 2RS 9 x 24 x 7mm
Main Pivot Bearing
61903 - 2RS 17 x 30 x 7mm
Horst Link Bearing
398V - 2RS 8 x 19 x 10 x 11mm

YT have confirmed that the correct bearings from Enduro Bearings are the following codes

Enduro 6902 2RS Max : 15 x 28 x 7mm
Enduro 609 2RS : 9 x 24 x 7mm
Enduro 6903 2RS Max : 17 x 30 x 7mm
Enduro 398 2RS Max: 8 x 19 x 10 x 11mm or 398 LLU Max E : 8 x 19 x 10 x 11mm

(The Horst Link is NOT an 8x19x9 bearing which is what was on the exploded diagram at the time of this post)
See email below.

I know I should grow up but I love the way CEO translates into German: Geschäftsführer: Markus Flossmann


Daniel (YT Industries)
Mar 18, 09:20
Good morning Steve,
wonderful! I do appreciate it very much.
Have a nice day.
Mit freundlichen Grüßen,
best regards,
Daniel


Steve Baxter
Mar 17, 14:35
Great reply. Really helpful. Clear answer and exactly the information I need. Thanks.
Steve

Steve Baxter.
(sent from mobile phone)


Daniel (YT Industries)
Mar 17, 14:21
Hi again Steve,
so now I have the needed information.
The horst link 398 bearing has definitely following measurements:
8 x 19 x 10/11mm
At the exploded drawing is a mistake and will be corrected soon.
Thank you for this attention.
We do not use angular contact bearings anywhere as well as extended inner races bearings.
I can confirm that all the bearings on the photos are definitely the bearings which you need.
I hope this information is helpful to you.
For further questions, please don't hesitate to contact me again.

Mit freundlichen Grüßen,
best regards,
Daniel


Super helpful in sorting my bearings out

| Next Page

 
Your subscriptions
no posts

Copyright © 2000 - 2020. Pinkbike.com. All rights reserved.
dv56 0.005818
Mobile Version of Website