Commencal Meta V3 Builds

PB Forum :: Commencal
Commencal Meta V3 Builds
| Next Page
Author Message
Posted: Aug 30, 2019 at 1:19 Quote
The only coil shock that fits it's the old Marzocchi Roco Coil without piggyback. I fitted it on my Meta and I'm rocking it without problems from several months!

Posted: Dec 29, 2019 at 13:25 Quote
Pedro0rsi wrote:
Hey, I own a 2012 meta am size m
And wanted to know if the cane creek db IL
Would fit, has any one tried yet?

update: It does not fit Frown


I wish I found this post a little sooner, I have just ordered the cane creek DB air Cs, I will give it a go to see if it fits but I'm not holding my breath anymore, looks like it will be getting returned ????

Posted: Mar 12, 2020 at 11:33 Quote
So what have folks been using for upgrades to rear shock on the V3?????

Posted: Mar 13, 2020 at 10:20 Quote
mtbbonebreakr wrote:
So what have folks been using for upgrades to rear shock on the V3?????

DVO Suspension Support via zendesk.com
11:17 AM (1 hour ago)
to me

DVO Suspension Support (DVO Suspension)

Mar 13, 09:17 PDT

Hello,

The shock will fit your frame with no interference.

Ronnie Dilan

Posted: Apr 19, 2020 at 20:29 Quote
mtbbonebreakr wrote:
mtbbonebreakr wrote:
So what have folks been using for upgrades to rear shock on the V3?????

DVO Suspension Support via zendesk.com
11:17 AM (1 hour ago)
to me

DVO Suspension Support (DVO Suspension)

Mar 13, 09:17 PDT

Hello,

The shock will fit your frame with no interference.

Ronnie Dilan

What DVO Shock are you talking about?

Posted: Apr 21, 2020 at 10:20 Quote
Cmccrindle wrote:
mtbbonebreakr wrote:
mtbbonebreakr wrote:
So what have folks been using for upgrades to rear shock on the V3?????

DVO Suspension Support via zendesk.com
11:17 AM (1 hour ago)
to me

DVO Suspension Support (DVO Suspension)

Mar 13, 09:17 PDT

Hello,

The shock will fit your frame with no interference.

Ronnie Dilan

What DVO Shock are you talking about?
TOPAZ T3AIR

Posted: May 7, 2020 at 15:53 Quote
mtbbonebreakr wrote:
Cmccrindle wrote:
mtbbonebreakr wrote:


DVO Suspension Support via zendesk.com
11:17 AM (1 hour ago)
to me

DVO Suspension Support (DVO Suspension)

Mar 13, 09:17 PDT

Hello,

The shock will fit your frame with no interference.

Ronnie Dilan

What DVO Shock are you talking about?
TOPAZ T3AIR



Hi,
did the topaz T3AIR fit?

thanks

Posted: Jun 3, 2020 at 5:15 Quote
FedeOV wrote:
mtbbonebreakr wrote:
Cmccrindle wrote:


What DVO Shock are you talking about?
TOPAZ T3AIR



Hi,
did the topaz T3AIR fit?

thanks
I havent tried it I was told to run piggy back by commencal that I need SX rear triangle..... Which is like $350

Posted: Nov 27, 2020 at 4:47 Quote
SvSake wrote:
ryanandrewrogers wrote:

That debonair looks sick just tucked in there... Is there any reason you think Commencal lists the V3 as not being able to take a debonair? I've got a V3 coming in a few days and I'm very interested in upgrading the rear shock.

I think because of the tight clearances. It really comes down to how thick the layer of paint on the chain stay is because there is very little room when the shock bottoms out. I was lucky but I think it is different for each frame, especially because the paint is not that great. Plus when you run a dropper post, the can touches the cable on bottom out, but thats not that big of a deal in my opinion.

But I have seen a couple of other v3's running the shock without problems and that is why i did it. Little bit of a gamble but the chance it doesn't fit is not that big.

It transforms the bike! I have the MM tune instead of the ML which is already better for my liking, add some bottomless rings and its awesome.

Hi
I'm looking forward to mount a monarch plus RC3 on my meta am 2013.
Do you think it could fit?
Thanks in advance

| Next Page

 
Your subscriptions
no posts

Copyright © 2000 - 2021. Pinkbike.com. All rights reserved.
dv42 0.008293
Mobile Version of Website