Disc brake bolts

PB Forum :: Mechanics' Lounge
Disc brake bolts
Previous Page | Next Page
Author Message
Posted: Oct 22, 2015 at 4:39 Quote
my bike bike came back from a bike shop the other day as it was having work done on the brake.
the bolts that hold the disc on a rounded out and i obviously cant get them out.
has anyone got any ideas.
please let me know

Posted: Oct 22, 2015 at 12:29 Quote
Try using a Torx bit which is slightly over sized. Tap it in with a hammer then try loosening.

Posted: Oct 22, 2015 at 19:39 Quote
If you don't think there that tight you can also try Super glue with the right size bit. Take a bit of super glue a decent amount and glue in the bit and then try. Or if you think there going to be a real pain to get out you can try the same thing with JB Weld. Just with JB Weld you can but its a real pain to get the bit out of the bolt.

Previous Page | Next Page

Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv65 0.008282
Mobile Version of Website