Reverb Stealth for 2012 Enduro

PB Forum :: Specialized
Reverb Stealth for 2012 Enduro
Previous Page | Next Page
Author Message
Posted: Feb 5, 2016 at 10:48 Quote
Hy guys,
Need to find out how to route a stealth dropper post on a 2012 Enduro comp. frame.
Someone with any experience with this?

Cheers!

Posted: Feb 9, 2016 at 12:33 Quote
iyan wrote:
Hy guys,
Need to find out how to route a stealth dropper post on a 2012 Enduro comp. frame.
Someone with any experience with this?

Cheers!
I have drilled my frame to route an internal dropper. Just know that you will void any warranty when you do this. I never had a warranty and 2 frames so was not worried about it. it has held up for over 2 years no with zero issue. I drilled it on the drive side in the downtube. The down tube being larger. I used a drill bit to make 2 holes about 1/8 " apart. the used a dremel to connect the holes together in an oval shape. I found a piece of rubber that the hose would slide through and slide into the frame itself. to protect the frame and the cable. I routed the cable through the down tube up the seat tube. You will have to remove your cranks and the drive side BB. there is a place where the BB, down tube and seat tube all meet a area the cable. can run without contacting the crank spindle.


 
Copyright © 2000 - 2019. Pinkbike.com. All rights reserved.
dv56 0.007185
Mobile Version of Website