I know this question has probably been asked a bunch of times; I have read for hours, watched videos, searched forums but noone really just comes out and says it.
Does the Pike RC have the same low speed compression as the RCT3? I know the RCT3 has the adjustable dial but can I do something similar on the RC model? I am looking at a cheap set of brand new RCs but I really need good low speed compression as I am upgrading due to the smaller bumps hurting my hands!
The RCT3 allows for additional LSC adjustment when the main compression knob is open. This cannot be done with the RC model. You can use the RC knob to achieve similar performance but not quite as tunable as the RCT3.
The RCT3 allows for additional LSC adjustment when the main compression knob is open. This cannot be done with the RC model. You can use the RC knob to achieve similar performance but not quite as tunable as the RCT3.
Doesn't the RC have the same LSC adjustment as the RCT3, just no threshold position?